>appena ho un po' di tempo le faccio, ho provato due >secondi >ad usare il /dev/gpmdata ma poi il mouse non mi funziona >sotto X >(che protocollo devo mettere? io ho tenuto ImPS/2). > >gpm mi e' molto utile e mi dispiacerebbe disinstallarlo. > > >buonanotte > Luca man gpm Per far funzionare gpm devi mettere: gpm -t imps2 -R raw man gpm [..] -R name Causes `gpm' to act as a repeater: any mouse data received while in graphic mode will be produced on the fifo `/dev/gpmdata' in protocol name. In principle, you can use the same names as for the `-t' option, although repeating into some protocols may not be implemented for a while. In addition, you can specify `raw' as the name, to repeat the mouse data byte by byte, without any protocol translation. If name is omitted, it defaults to `msc'. Using gpm in repeater mode, you can configure the X server to use its fifo as a mouse device. This option is useful for bus-mouse owners to override the single-open limitation. It is also an easy way to manage those stupid dual-mode mice which force you to keep the middle button down while changing video mode. The option is forced on by the `-M' option. bye Marco Ciampa ______________________________________________________________________ Con Yahoo! vinci viaggi per i Mondiali FIFA 2002 http://it.yahoo.com/mail_it/foot/?http://lasfida.yahoo.net/ -- Per iscriversi (o disiscriversi), basta spedire un messaggio con SOGGETTO "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxxxxxx