[linux-muc] Re: usbfrage

  • From: Thomas Pfeiffer <thomas.pfeiffer@xxxxxxxxxxxx>
  • To: linux-muc@xxxxxxxxxxxxx
  • Date: Fri, 30 Nov 2007 17:34:08 +0100

ok, neuer Versuch...

Hallo Johannes,

USB Sticks werden in der Regel als SCSI-Device erkannt. Das heisst die
Unterstützung für SCSI Disks muss auch aktiviert werden.
Mehr Info gibts hier:
http://www.gentoo.org/doc/de/usb-guide.xml

Viele Grüsse,
Thomas

Joh_Borres@xxxxxx schrieb:
> Liebe Liste,
> 
> ich habe für einen ziemlich alten Rechner VAIO 1998 mit Debian Woody versucht 
> Kontakt zu einem usb-stick herzustellen. Nun meine ich, dass der usb-stick 
> erkannt wird (neuer kernel, bios verändert). Wie ich das jedoch genau in 
> /etc/fstab einbinden soll, ist mir ein Rätsel. Unter welcher Adresse 
> erscheint denn der USB-Stick.
> 
> Ich habe mal die wesentlichen Ausschnitte, die nach dmesg ausgespuckt werden, 
> dokumentiert:
> 
> (...)
> PCI: PCI BIOS revision 2.10 entry at 0xfda04
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> TCP: Hash tables configured (ehash 131072 bhash 65536)
> Starting kswapd v 1.5
> vga16fb: initialiizing
> vga16fb: wapped to 0xc00a0000
> Console: switching to colour frame buffer device 80x30
> fb0:VGA16 VGA frage buffer device
> Serial deriver version 4.27 with BUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS02 at 0x03e8 (irq = 4) is a 16550A
> pty: 256 Unix98 ptys configured
> RAM disk driver initialized: 16 RAM disks of 4096K size
> loop: registered device at major 7
> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: not 100 % native mode: will probe irqs later
>       ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS setting: hda:DMA, hdb:pio
>       ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS setting: hdc:pio, hdd:pio
> hda: FUJITSU MHC2040AT, ATA DISK drive
> hdc: TOSHIBA CD-ROM XM-1802B, ATAPI CDROM drive
> ide2: ports already in use, skipping probe
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: FUJITSU...
> hdc: ATAPI...
> (...)
> Partition check:
> hda: hda1 hda2 hda3
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
> apm: disabled on user request
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb.c: registered new driver dabusb
> dabusb.c: v1.54: DAB-USB Interface Driver for Linux (c)1999
> usb.c: registered new driver hid
> usb.c: registered new driver usblp
> usb-uhci.c: $Resivion: 1.237 $ time 01:30:57 Nov 22 2007
> usb-uhci.c: High bandwidth mode disabled
> PCI: Enabling bus mastering for device 00:3a
> usb-uhci.c.: USB UHCI at I/0 0xfce0, IRQ 9
> usb-uhci.c.: Detected 2 ports
> usb.c: new USB bus resitered, assigned bus number 1
> usb.c: USB new device connect, assigned device number 1
> usb.c:  kmalloc IF c5feb980, numif 1
> usb.c:  new device atrings: Mfr=0, Product=2, SerialNumber=1
> usb.c:  USB device number 1 default language ID 0x0
> Product: USB UHCI Root Hub
> SerialNumber: fce0
> hub.c: USB hub found
> hub.c: 2 ports detected
> hub.c: standolone hub
> hub.c: ganged power switching
> hub.c:  global over-current protection
> hub.c:  power on to power good time: 2ms
> hub.c:  hub controller current requirement: 0mA
> hub.c:  port removable status: RR
> hub.c: local power source is good
> hub.c: no over-current condition exists
> hub.c:  enabling power on all ports
> usb.c:  hub driver claimed interface c5feb980
> usb.c:  call_policy add, num 1 -- no FS yet
> hub.c:  port 1 connection change
> hub.c:  port 1, portstatus 101, change 1, 12 Mb/s
> VFS: Mounted root /ext2 filesystem) readonly
> Freeing unused kernel memory: 72k freed
> hub.c: port1, portstatus 103, change 0, 12 Mb/s
> hub.c: USB new device connect on bus1/1, assigned device number 2
> usb.c:  USB new device connect, assigned device number 2
> usb.c: kmalloc IF c5febbc0, numif 1
> usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
> usb.c:  USB device number 2 default language ID 0x409
> Manufacturer: USB_DISK
> Product: USB_DISK
> SerialNumber: 0ABC
> usb.c: unhandled interfaced on device
> usb.c:USB device 2 (vend/prod 0x1aa6/0x201) is not claimed by any active 
> driver
> .
>               Length                                  =10
>               DescriptionType                 =01
>               USB version                             = 2.00
>               Vendor: Products                        =1aa6:0201
>               MaxPacketSize0                  =64
>               NumConfigurations                       =1
>               Device version                          =10.00
>               Device Class:SubClass:Protocol=00:00:00
>               Per-interface classes
>               Configuration:
>               bLength  =9
>               (...)
> usb.c: kusbd: /sbin/hotplug add 2
> Adding Swap
> ...
> Auf Unterstützung hoffend, Johannes B
> 
> ______________________________________________________________________________
> Jetzt neu! Im riesigen WEB.DE Club SmartDrive Dateien freigeben und mit 
> Freunden teilen! http://www.freemail.web.de/club/smartdrive_ttc.htm/?mc=021134
> 
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~ Info (Main-Site): http://www.linux-muc.de/
> ~~ Un/Subscribe: http://www.freelists.org/cgi-bin/list?list_id=linux-muc
> ~~ Archives http://www.freelists.org/archives/linux-muc/
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~ Info (Main-Site): http://www.linux-muc.de/
~~ Un/Subscribe: http://www.freelists.org/cgi-bin/list?list_id=linux-muc
~~ Archives http://www.freelists.org/archives/linux-muc/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Other related posts: