[leveller] Re: Installing problem with 2.5a

2.5a is an alpha, which is time limited, so the program sees today's date and just exits. The official 2.5 is out, however, so you can use that.

Ray


Cees wrote: 
Hello Ray,

Thanks for the updates on Leveller.

I've tried to install version 2.5a several times.
I kopied the res directory and renamed the excisting Leveller.exe.
There are no other dirs on the pc with the name "Leveller"

When I start 2.5a I see the startup-screen very briefly and then nothing
happens.
Taskmanager does not show leveller is running.

I've also tried to uninstall everyting, building Leveller up from version
1.x through 2.4 (which runs fine) and upgrade to 2.5a again, with the same
result.

I run win2000 on a PIII 550 with 512 MB RAM

Do you have any suggestions on how I could get it up and running?

Best regards,
Cees van der Mark.




----- Original Message ----- From: "Ray Gardener" <rayg@xxxxxxxxxxxxxxxxxx>
To: <leveller@xxxxxxxxxxxxx>
Sent: Friday, January 20, 2006 8:00 AM
Subject: [leveller] Open Leveller status


Although this is a very minor blip on the radar, I'm happy to report
that the Open Leveller fund has achieved its first full percentage point
of funding.

This is either an exponential function with a normally long flat slope
at the beginning, or I'm dreaming in Technicolor, but I've been told
that if one must dream, dream big. :)

Ninety-nine to go,
Ray










Other related posts: