[LRflex] Re: Introducting myself

David,

Thank you. Mine is the older version. It's too late or
buy one here. I'll  see if it's available on the other
side of the ocean. 

Richard

--- David Young <telyt@xxxxxxxxx> wrote:

> yong chang wrote:
> 
> >The 50mm F2 may have a diameter of 45mm. Can you or
> someone recommend places
> >to get filters or step-up rings. 
> >
> 
> Good Mornin' Richard!
> 
> If your 50mm  Summicron has a built-in, extendable
> lens hood, is should 
> have E55 filters (55mm thread).  If it is the older
> design, with the 
> clip-on lens hood, then the filters size is 43.5mm.
> Such filters are 
> difficult (though not impossible) to find. In this
> case you need a 
> #14160  filter ring (fairly readily available from
> B&H, amongst others) 
> which is used to hold Series VI filters in place. 
> 
> Hope this helps.
> 
> David.
> 
> -- 
> David Young,
> Logan Lake, BC    
> CANADA. 



                
__________________________________ 
Start your day with Yahoo! - Make it your home page! 
http://www.yahoo.com/r/hs
------
Unsubscribe or change to/from Digest Mode at:
    http://www3.telus.net/~telyt/lrflex.htm
Archives are at:
    www.freelists.org/archives/leicareflex/

Other related posts: