[LRflex] Re: Getting Screwed
- From: David Young <dsy@xxxxxxxxxxxxxxx>
- To: leicareflex@xxxxxxxxxxxxx
- Date: Tue, 03 Jun 2008 10:20:09 -0700
Frank asked:
David.,.. would you please describe the screw... thread pitch and
diameter... so that in the future, it will appear in the archives....
and then exclaimed:
Whoops.... already there.... Thanks David for the info....
Not quite, Frank!
The machine screw in question is properly described as an M5 -
0.8x25mm socket head cap screw - black. The socket head accepts an
Allen key.
Better?
I have a few left. If you need one, email me, off list.
Cheers!
---
David Young,
Logan Lake, CANADA
Limited Edition Prints at: www.furnfeather.net
Personal Web-site at: www.main.furnfeather.net
Stock Photography at: http://tinyurl.com/2amll4
Other related posts:
