RE: Maxwell Optics

Do you have a link for Bill Maxwell?  I would like to have a screen that is
shaded on the outer margins with horizontal and vertical 1/3 lines and have
the split image/microprism.  TIA. 

Bill in Denver 

-----Original Message-----
From: leica-bounce@xxxxxxxxxxxxx [mailto:leica-bounce@xxxxxxxxxxxxx] On
Behalf Of David Young
Sent: Tuesday, April 18, 2006 11:21 AM
To: leicareflex@xxxxxxxxxxxxx; leica@xxxxxxxxxxxxx
Subject: Maxwell Optics

The stock split image/microprism screen (as supplied with the DM-R, goes
very dark at f13.6 (400 Telyt & 2x converter, wide open!)  I much prefer my
all matte screen for this use.

I am debating buying a new, all matte, screen with sensor lines for the DM-R
or would I be better off to send my present screen to Bill Maxwell for his
Hi-Lux coating. (He can also add the  DM-R's sensor
lines.)  The cost for both options is within $20, with Bill's being the
slightly cheaper.

Has anybody here had their screens coated by Bill?   Are the results 
really noticeable?

And, has anybody here had him add DMR sensor markings to a screen.  Is his
work as good as Leica's?

Is he really as fast as he says (3 day turnaround?)

Many thanks for any and all feedback.

Cheers!
---

David Young,
Logan Lake, CANADA

Personal Web-site at:
        http://www3.telus.net/~telyt

Limited Edition Prints at:
        http://www3.telus.net/~telyt/prints.htm

Leica Reflex Forum web-page:
        http://www3.telus.net/~telyt/lrflex.htm





=========================================================
To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with 'unsubscribe'
in the Subject field. The acknowledgment that you then receive MUST be
replied to per instructions. You may also log in to the Web interface to
unsubscribe.




=========================================================
To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with 'unsubscribe' in 
the Subject field. The acknowledgment that you then receive MUST be replied to 
per instructions. You may also log in to the Web interface to unsubscribe.

Other related posts: