RE: M8 question...
- From: "Jeffery Smith" <jls@xxxxxxxxxx>
- To: <leica@xxxxxxxxxxxxx>, "'LUG Group'" <lug@xxxxxxxxxxxxxxx>, "'MUG Users'" <MUGers@xxxxxxxxxxxxxxx>
- Date: Sat, 26 May 2007 16:47:47 -0500
The Rangefinder Forum has a group dedicated solely to M8 problems:
http://www.rangefinderforum.com/forums/archive/index.php/f-76.html
You might find something here.
Jeffery Smith
New Orleans, LA
http://www.400tx.com
http://400tx.blogspot.com/
-----Original Message-----
From: leica-bounce@xxxxxxxxxxxxx [mailto:leica-bounce@xxxxxxxxxxxxx] On
Behalf Of Steve Barbour
Sent: Saturday, May 26, 2007 2:44 PM
To: LUG Group; LEG; MUG Users
Cc: Sandy Ritz; Ed Panhuise
Subject: M8 question...
M8 problem... I hope you can help...
after months of using my M8 without any problem... I went to shoot
today and it fails to record an image... just the red blinking light
on the lower right back.
I can turn off the light only by removing the battery...and
reinserting it...
firmware 1.102... reinstalled... same result...
otherwise the program... and the ability to format the card...etc
seems OK...
I tried a variety of cards that I have used successfully in the past...
no image...just blinking light...
your advice/thoughts please?
thanks, Steve
=========================================================
To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with 'unsubscribe'
in the Subject field. The acknowledgment that you then receive MUST be
replied to per instructions. You may also log in to the Web interface to
unsubscribe.
========================================================To Unsubscribe: Send
email to leica-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field.
The acknowledgment that you then receive MUST be replied to per instructions.
You may also log in to the Web interface to unsubscribe.
- References:
- M8 question...
- From: Steve Barbour
Other related posts:
- » M8 question...
- » RE: M8 question...
- » Re: M8 question...
- » Re: M8 question...
- » Re: M8 question...
- » Re: M8 question...
- » RE: M8 question...
- » Re: M8 question...
- » RE: M8 question...
- » RE: M8 question...
- » RE: M8 question...
- » Re: M8 question...
- M8 question...
- From: Steve Barbour