Re: M6 TTL exposure meter

On Wed, 19 Jan 2005, jrofcbr@xxxxxxxxxxx wrote:

> However, according to the instruction booklet, the LEDs should indicate
> correct spot metering when the two triangular LEDs points towards each
> other.
>
> I get a round red dot.  Furthermore in playing with the metering system,
> it's hard to get the metering systems to change unless I'm pointing it
> directly at a bright light source, whether it's open wide or step-down.

The TTL has two triangles and one dot. The correct exposure is set when
the round dot is lit. The plain M6 only has the two triangles.

The exposure meter of my M6TTL is very responsive to changes... however,
I have to change the batteries at least twice a year regardless of useage,
it eats batteries like nothing else. Change the batteries an try again.


Grüße aus Hohenlohe,

        Martin Jangowski

| Martin Jangowski                         E-Mail: Martin@xxxxxxxxxxxx|
|                        Netzwerke und Multimedia                     |
| Voice: +49 7946/940790                         Fax: +49 7946/940791 |
| Snail Mail: Von-Olnhausen Str. 4            74626 Bretzfeld Germany |

========================================================To Unsubscribe: Send 
email to leica-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field. 
The acknowledgment that you then receive MUST be replied to per instructions. 
You may also log in to the Web interface to unsubscribe.

Other related posts: