Re: M6 TTL exposure meter

The M6 TTL shows a red dot when proper exposure is used. The non-TTL M6
classic shows 2 red triangles.

Try new batteries, remember to turn the speed dial to "off" on an M6 TTL
when not in use.

Chris

----- Original Message -----
From: <jrofcbr@xxxxxxxxxxx>

Subject: M6 TTL exposure meter


>
> Thanks to all who gave me tips on the second camera.  I settled on buying
an M6TTL with a Summicron-M 1.2 lens.
>
> However, according to the instruction booklet, the LEDs should indicate
correct spot metering when the two triangular LEDs points towards each
other.
>
> I get a round red dot.  Furthermore in playing with the metering system,
it's hard to get the metering systems to change unless I'm pointing it
directly at a bright light source, whether it's open wide or step-down.
>
> Is there a possible problem with weak batteries or am I expecting too much
from the exposure meter?  Perhaps being a new user, I need to gain a better
understanding of how the meter system works and what to expect.
>
> Thanks,
>
> Ollie



=========================================================
To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with 'unsubscribe' in 
the Subject field. The acknowledgment that you then receive MUST be replied to 
per instructions. You may also log in to the Web interface to unsubscribe.

Other related posts: