M6 TTL exposure meter

Thanks to all who gave me tips on the second camera.  I settled on buying an 
M6TTL with a Summicron-M 1.2 lens.

However, according to the instruction booklet, the LEDs should indicate correct 
spot metering when the two triangular LEDs points towards each other.

I get a round red dot.  Furthermore in playing with the metering system, it's 
hard to get the metering systems to change unless I'm pointing it directly at a 
bright light source, whether it's open wide or step-down.

Is there a possible problem with weak batteries or am I expecting too much from 
the exposure meter?  Perhaps being a new user, I need to gain a better 
understanding of how the meter system works and what to expect.

Thanks,

Ollie

=========================================================
To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with 'unsubscribe' in 
the Subject field. The acknowledgment that you then receive MUST be replied to 
per instructions. You may also log in to the Web interface to unsubscribe.

Other related posts: