Re: First Impressions/Build Quality VC40mm/1.2 Lens and Hood

Greg, did you mean the 40mm 1.4 V/C lens?
Thanks, Bill Lawlor
----- Original Message ----- 
From: "GREG LORENZO" <gregj.lorenzo@xxxxxxx>
To: "Leica Users Group LUG" <lug@xxxxxxxxxxxxxxx>; <leica@xxxxxxxxxxxxx>
Sent: Wednesday, December 22, 2004 5:19 PM
Subject: First Impressions/Build Quality VC40mm/1.2 Lens and Hood


> I purchased the 'Classic' or 'single coat' version of this lens from
Joseph Yao earlier this month. It arrived in the mail late this afternoon. I
have shot a roll of Tri-X pushed to 800 iso but I won't have my negatives
back until at least tomorrow night or Friday.
>
> My impressions of the build quality of the lens and hood so far are as
follows:
>
> Compact, solid feel to the lens and for the first time for a VC lens (for
me) there is a built-in Leica-like lens mount alignment (i.e. a small red
dot).
>
> Interesting release on the front lens cap; its a dual squeeze release
requiring a thumb and fore-finger to put on and take off.
>
> Metal circular lens hood, very much like the hood on Leica's current 35
Summicron, except you align the hood and twist it by a third of a turn to
lock-on or release the hood.
>
> Focusing is via a semi circular tab, reminiscent of 4th generation Leica
35 Summicron. Focusing action is a little stiff but I expect that it will
get much smoother with use.
>
> This lens, when mounted, brings up the 50mm framelines on my M2.
>
> So far I'm pretty impressed but the real test is image quality!
>
> Regards,
>
> Greg
>
>
>
>
> =========================================================
> To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with
'unsubscribe' in the Subject field. The acknowledgment that you then receive
MUST be replied to per instructions. You may also log in to the Web
interface to unsubscribe.


=========================================================
To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with 'unsubscribe' in 
the Subject field. The acknowledgment that you then receive MUST be replied to 
per instructions. You may also log in to the Web interface to unsubscribe.

Other related posts: