FS <8-24-2007>
- From: Jim Brick <jim@xxxxxxxxx>
- To: LEG <leica@xxxxxxxxxxxxx>
- Date: Fri, 24 Aug 2007 10:15:11 -0700
Leica equipment for sale:
Leica SS M3 (S/N 1026763), 50mm Rigid Summicron (S/N 1813348) and
12571J shade + cap, 135mm Steinheil f/4.5 lens, MC meter, M3 still
has factory seal in place, has small scuff marks on camera top where
meter was put on and taken off. There is a very tiny piece of
vulcanite chipped off where the bottom plate hooks on. Overall, there
are no dents or deep marks, just normal use marks. Viewfinder is
clean and clear, speeds are accurate. Includes all original factory
papers, original factory box, original instructions, never-ready
case, etc. $1500.
Hasselblad equipment for sale:
Complete 203FE, Mint, all boxes, bags, caps, and papers. This 203 has
the ClearSight Quick release Swiss Arca foot rather than the
Hasselblad foot. The camera mounts directly on all Swiss Arca, Really
Right Stuff, and Kirk tripod head products. A perfect camera. $2000.
FlexBody, complete, mint, everything, including a rare Hasselblad
factory upgrade. This FlexBody has a plain ground glass screen
(Acute-Matte D) without the stupid (stupid for this camera) split
image rangefinder. This camera is also equipped with the ClearSight
Arca Swiss foot, $2000.
100mm CFi Hasselblad lens, Mint, criminally sharp, all boxes, bags,
caps, and papers. $1500,
110mm f/2.0 FE Hasselblad lens, mint, shade, bag, everything. $3000.
50mm FE Hasselblad lens, Mint-, including a special lens shade made
for this lens, all caps and filter rings. $1000.
E12 film back, mint, $300 (two available). Buy both for $500. Or with
a camera at $200 each.
E24 film back, mint, $400 (two available). Buy both for $700. Or with
a camera at $300 each.
Ten day return privilege (10DRP) and I pay USA insured postage, on everything.
:-)
Jim Brick
jim@xxxxxxxxx
=========================================================
To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with 'unsubscribe' in
the Subject field. The acknowledgment that you then receive MUST be replied to
per instructions. You may also log in to the Web interface to unsubscribe.
Other related posts: