At 5:56 PM -0700 2003/10/01, Geoffrey Kruse wrote: > I cannot recall if this happened in kismac f, however in f1 i observe > that kismac is sucking down about 60% of the cpu, even while not > scanning. This is on a PBG4 800 DVI. I've got the same hardware, and I'm not seeing that. I see KisMac taking 20-30%, top taking 10-20% itself, with Window Manager usually 5-15% (although sometimes top and Window Manager momentarily switch places). What kind of card are you using? What driver? How many other stations are within range? Myself, I'm using my Senao SL2511CD PLUS (200mW Prism), switching between the IOXperts wireless driver (normal use) and MacJack (sniffing), and I've only got my two base stations within view. -- Brad Knowles, <brad.knowles@xxxxxxxxx> "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." -Benjamin Franklin, Historical Review of Pennsylvania. GCS/IT d+(-) s:+(++)>: a C++(+++)$ UMBSHI++++$ P+>++ L+ !E-(---) W+++(--) N+ !w--- O- M++ V PS++(+++) PE- Y+(++) PGP>+++ t+(+++) 5++(+++) X++(+++) R+(+++) tv+(+++) b+(++++) DI+(++++) D+(++) G+(++++) e++>++++ h--- r---(+++)* z(+++)