[kismac] Re: Where to order a cheap Prism2 USB device?

Thanks!  I guess I should've looked myself first!

On Apr 21, 2007, at 4:19 AM, Geordie Millar wrote:
Yeah, there is prism2 support. I think the driver you are looking for is linux-wlan-ng.
http://www.google.com/search?client=safari&rls=en&q=gentoo+usb +prism2&ie=UTF-8&oe=UTF-8 

First result: http://gentoo-wiki.com/HOWTO_Prism2_USB_on_Gentoo

On 20/04/2007, at 11:27 PM, Jake Trimble wrote:
I don't know if this is the place to ask, but do you guys know if there is prism2 support for usb devices in linux? I just installed Gentoo on an external drive and can't get the airport extreme working. Thanks! 

-jake
p.s. I guess it doesn't matter though cause I have an 802.11n network. It'd still be nice though! 

On Apr 20, 2007, at 1:11 AM, ryan wrote:
Yep. There are even real Mac OS drivers in case you want to use it for non-sniffing purposes. See http://www.macosxhints.com/ article.php?story=20050201091946184 for details.
Although, if you just want to use it with Kismac, it's probably best to leave the drivers uninstalled because they tend to get in the way. 

-Ryan

On Apr 19, 2007, at 8:04 PM, Jake Trimble wrote:


really?  I thought it was prism2...  Sweet!

On Apr 19, 2007, at 3:13 PM, ryan wrote:


JAke:
The D-Link DWL-G122 (rev b1 at least, maybe other revs) is a USB ralink device. 


On Apr 18, 2007, at 12:36 AM, JAke wrote:
How long before they will support injection do you think? Also, sorry that I can't help Lawrence, thats really too bad... Also (macuser), are there usb ralink cards, because I'm on an iBook (G4) without pcmcia slots... 

On 4/17/07, themacuser <themacuser@xxxxxxxxx> wrote:
Prism2 cards are actually b only, and the network is only in g
traffic. Wait for ralink cards to support injection. Yes, this is said to be the univeral solution to everything. But thats why we are doing 
it...

On 4/18/07, Lawrence Bean <lbean@xxxxxxxxxxxxx> wrote:
> kismac@xxxxxxxxxxxxx writes:
> >I'd go for the wusb11 if I were you. I've had the most luck with it. 
>
> Hey Jake.
>
> I picked up a Linksys WUSB11 v2.5 and have just started playing with it > and Kismac. I'm using a G3 iBook with 10.4.9, have downloaded/compiled > 0.21a from the USB branch, and have not installed any other drivers. I > have a WAP network (a linksys, average signal 36) within easy reach of my > condo and touched base with the owner about running a sample hack ... to 
> practice and to help them shore up their perimeter.
>
> I watched the video
> http://www.youtube.com/watch?v=G38PD5FyUxE
> and selected USB Device, passive mode as primary injection. I homed in on > the main channel and hub, and after collecting a couple hundred data > packets chose "Authentication Flood". When I do this, after about a minute > the signal goes to zero and no further packets are collected. If I stop > the flood, signal goes back to normal and packets are collected again. If > I choose "reinject packets", I get a box saying "waiting for interesting > packets" and packets continue to be collected, but after a while I get > "unable to start a reinjection attack because the network seems not to be 
> reacting".
>
> Do you have any hints for me, or can you describe a setup you know 
> cracking WEP worked so I can verify my installation is correct?
>
>
>
>

Other related posts: