[kismac] Re: Re(2): Decrypt Output

From: billy c <billyc@xxxxxxxxxxxxxxx>
To: kismac@xxxxxxxxxxxxx
Date: Thu, 06 Oct 2005 08:33:32 -0500

you need to start an x11 server (such as apples) for ethereal to run in. then call ethereal from the xterm.

-bill

Michael Peth wrote:

So I got ethereal installed via fink but I get (ethereal:11930): Gtk-WARNING **: cannot open display: However, tethereal works fine in darwin. When I use tethereal -r OUTPUTFILE it reads all the packets but doesn't spit out a key at the end. Any sugggetions ?
Mathieu Masseboeuf wrote:
Hi,
There are compilation issues if you run 10.4, those are fixed in CVS.
If it's your case, either get a pre-compiled package or build from CVS.
Mathieu
On 6 oct. 05, at 14:45, Alexis Ramel wrote:
Or.. fink !
http://fink.sf.net/
The same as DarwinPorts, pick the one you want.

References:

[kismac] Re: Decrypt Output
From: Ron Rosson

[kismac] Re: Decrypt Output
From: Alexis Ramel

[kismac] Re(2): Decrypt Output
From: Mathieu Masseboeuf

[kismac] Re: Re(2): Decrypt Output
From: Michael Peth

[kismac] Re: Re(2): Decrypt Output

Other related posts: