[kismac] Re: Ralink drivers

you need to compile the usb-drivers svn...it's different from the main trunk

On Oct 5, 2006, at 2:12 AM, Justin Morris wrote:

I've tried that with builds r197-199 recently (from usb-drivers) and have not been able to get a dwl-g122 to read anything passively.

The console comes up as it is switching channels. There are networks here but it does not seem them.
RalinkJack::Switched to channel 3

Anything I am doing wrong?

Justin

On 10/1/06, devnullian@xxxxxxx <devnullian@xxxxxxx> wrote:
There's an article on the wiki about this, but, in short,
1)Get the Apple developer kit (with Xcode, etc.)--on your OS X disc
or download from Apple
2)Get subversion, then get svnX
3)Check out the source code from https://svn.binaervarianz.de/kismac/
branches/usb-drivers
4)run compile.command
5)Application will be under /build/universal

Links and more details are on the wiki.
On Oct 1, 2006, at 12:56 PM, zer matt wrote:

> No, I just downoaded R196, installed it and run it. What I am going
> to do with the code from https://svn.binaervarianz.de/kismac/
> branches/usb-drivers ?
>
> I'm quite new to the Mac-world.... ;-)
>
> Zer
>
>
>>
>> Did you get the code from https://svn.binaervarianz.de/kismac/
>> branches/usb-drivers ?
>> If yes, then you should have the option in the prefs panel for
>> "usb  device" instead of "usb prism2 device".
>> Select the usb device and you should be good to go.
>> On Oct 1, 2006, at 12:17 PM, zer matt wrote:
>>
>>> I just got a DWL-G122 vb1 usb dongle. I should work with Kismac.
>>> But the Ralink driver is not available to select in Kismac. How
>>> do  I load them i passive mode?
>>>
>>> Zer
>>>
>>>
>>>
>>
>>
>
>
>




Other related posts: