[kismac] Re: Ralink drivers

  • From: Geoffrey Kruse <gkruse@xxxxxxxxx>
  • To: kismac@xxxxxxxxxxxxx
  • Date: Thu, 5 Oct 2006 11:07:27 -0700

You can get the driver from ralink.

Geoff
On Oct 5, 2006, at 11:05 AM, Justin Morris wrote:

I did not make any adjustments with rx sens at all. I can see the networks just find with the DWL-122 and Airport Extreme. These networks aren't far away at all. I didn't see any drivers for DWL- G122 for OS X on D-Link's site. :-/

Justin

On 10/5/06, Geoffrey Kruse <gkruse@xxxxxxxxx> wrote:
The rx sensitivity is pretty poor on these cards... also we don't use the rx sens adjustment yet. Is it possible you just aren't in range with this card? Can you see the nets using ralink's driver?


Geoff

On Oct 5, 2006, at 9:52 AM, Justin Morris wrote:

Interestingly it find my own network (WPA) but nothing else. Maybe it is interacting with the Airport Extreme on my MacBook? D- Link DWL-G122 H/W ver B1, F/W ver 2.02 Bug Dave: I did compile from usb-drivers.

Here is the log from starting the program to quiting it.


2006-10-05 10:47:13.217 KisMAC[4601] KisMAC startup done. Build from Oct 4 2006 18:35:51. Homedir is /Users/justinmorris/Desktop/ usb-drivers/build/Universal/KisMAC.app. NSAppKitVersionNumber: 824.420000
2006-10-05 10:47: 13.217 KisMAC[4601] Registering with Growl
2006-10-05 10:47:14.808 KisMAC[4601] GPS integration disabled
2006-10-05 10:47:17.716 KisMAC[4601] GPS integration disabled
2006-10-05 10:47: 20.472 KisMAC[4601] GPS integration disabled
2006-10-05 10:47:26.716 KisMAC[4601] GPS integration disabled
2006-10-05 10:47:42.927 KisMAC[4601] Ralink 2500 USB Device found (vendor = 0x2001, product = 0x3c00)
2006-10-05 10:47: 42.928 KisMAC[4601] found unwanted device (vendor = 0x5ac, product = 0x8501)
2006-10-05 10:47:42.930 KisMAC[4601] found unwanted device (vendor = 0x5ac, product = 0x8006)
2006-10-05 10:47:42.931 KisMAC[4601] found unwanted device (vendor = 0x5ac, product = 0x8205)
2006-10-05 10:47:42.933 KisMAC[4601] found unwanted device (vendor = 0x5ac, product = 0x8005)
2006-10-05 10:47:42.935 KisMAC[4601] found unwanted device (vendor = 0x5ac, product = 0x8240)
2006-10-05 10:47:42.937 KisMAC[4601] found unwanted device (vendor = 0x5ac, product = 0x8005)
2006-10-05 10:47:42.939 KisMAC[4601] found unwanted device (vendor = 0x5ac, product = 0x8005)
2006-10-05 10:47:42.941 KisMAC[4601] found unwanted device (vendor = 0x5ac, product = 0x217)
2006-10-05 10:47:42.943 KisMAC[4601] found unwanted device (vendor = 0x5ac, product = 0x8005)
2006-10-05 10:47:42.966 KisMAC[4601] USBJack is now ready to start working.
2006-10-05 10:47:42.967 KisMAC[4601] !!!!!set Rx control = 4e
2006-10-05 10:47: 42.969 KisMAC[4601] --> NICInitializeAsic
2006-10-05 10:47:42.971 KisMAC[4601] !!!!!set Rx control = 1
2006-10-05 10:47:43.992 KisMAC[4601] Read BBP_Version Value = 19
2006-10-05 10:47:44.055 KisMAC[4601] <-- NICInitializeAsic
2006-10-05 10:47:44.055 KisMAC[4601] --> NICReadEEPROMParameters
2006-10-05 10:47:44.062 KisMAC[4601] Permanent MAC is: 00:15:e9:2b: 29:af.
2006-10-05 10:47:44.117 KisMAC[4601] Tx power for channel 1 : 19
2006-10-05 10:47: 44.117 KisMAC[4601] Tx power for channel 2 : 19
2006-10-05 10:47:44.117 KisMAC[4601] Tx power for channel 3 : 19
2006-10-05 10:47:44.117 KisMAC[4601] Tx power for channel 4 : 19
2006-10-05 10:47: 44.117 KisMAC[4601] Tx power for channel 5 : 19
2006-10-05 10:47:44.117 KisMAC[4601] Tx power for channel 6 : 19
2006-10-05 10:47:44.117 KisMAC[4601] Tx power for channel 7 : 19
2006-10-05 10:47:44.117 KisMAC[4601] Tx power for channel 8 : 19
2006-10-05 10:47: 44.117 KisMAC[4601] Tx power for channel 9 : 19
2006-10-05 10:47:44.117 KisMAC[4601] Tx power for channel 10 : 19
2006-10-05 10:47:44.117 KisMAC[4601] Tx power for channel 11 : 19
2006-10-05 10:47: 44.117 KisMAC[4601] Tx power for channel 12 : 19
2006-10-05 10:47:44.117 KisMAC[4601] Tx power for channel 13 : 19
2006-10-05 10:47:44.118 KisMAC[4601] Tx power for channel 14 : 19
2006-10-05 10:47:44.118 KisMAC[4601] CountryRegion= 0x0
2006-10-05 10:47: 44.133 KisMAC[4601] R24LowerValue = 0x80
2006-10-05 10:47:44.133 KisMAC[4601] R24HigherValue = 0x68
2006-10-05 10:47:44.133 KisMAC[4601] R25LowerValue = 0x50
2006-10-05 10:47:44.133 KisMAC[4601] R25HigherValue = 0x38
2006-10-05 10:47:44.133 KisMAC[4601] R61LowerValue = 0x5e
2006-10-05 10:47:44.133 KisMAC[4601] R61HigherValue = 0x6e
2006-10-05 10:47:44.133 KisMAC[4601] BBPR17LowSensitivity = 0x44
2006-10-05 10:47:44.133 KisMAC[4601] BBPR17MidSensitivity = 0x37
2006-10-05 10:47:44.133 KisMAC[4601] RSSIToDbmOffset = 0x72
2006-10-05 10:47:44.133 KisMAC[4601] <-- NICReadEEPROMParameters
2006-10-05 10:47:44.133 KisMAC[4601] --> NICInitAsicFromEEPROM
2006-10-05 10:47: 44.141 KisMAC[4601] BBPTuningParameters.R24LowerValue = 80
2006-10-05 10:47:44.141 KisMAC[4601] BBPTuningParameters.R25LowerValue = 50
2006-10-05 10:47:44.141 KisMAC[4601] BBPTuningParameters.R61LowerValue = 5e
2006-10-05 10:47: 44.147 KisMAC[4601] Antenna.word = 0x2829
2006-10-05 10:47:44.155 KisMAC[4601] <-- NICInitAsicFromEEPROM RfType = 5
2006-10-05 10:47:44.164 KisMAC[4601] It is this 43,
2006-10-05 10:47:44.164 KisMAC[4601] It is this 128,
2006-10-05 10:47:44.166 KisMAC[4601] <-- NICInitAsicFromEEPROM
2006-10-05 10:47:44.166 KisMAC[4601] Driver WaveDriverUSBIntersil was created.
2006-10-05 10:47:44.212 KisMAC[4601] RalinkJack::Switched to channel 1
2006-10-05 10:47:44.213 KisMAC[4601] !!!!!set Rx control = 4e
2006-10-05 10:47:44.438 KisMAC[4601] RalinkJack::Switched to channel 3
2006-10-05 10:47:44.688 KisMAC[4601] RalinkJack::Switched to channel 5
2006-10-05 10:47: 44.947 KisMAC[4601] RalinkJack::Switched to channel 7
2006-10-05 10:47:45.202 KisMAC[4601] RalinkJack::Switched to channel 9
2006-10-05 10:47:45.450 KisMAC[4601] RalinkJack::Switched to channel 11
2006-10-05 10:47: 45.694 KisMAC[4601] RalinkJack::Switched to channel 2
2006-10-05 10:47:45.943 KisMAC[4601] RalinkJack::Switched to channel 4
2006-10-05 10:47:46.193 KisMAC[4601] RalinkJack::Switched to channel 6
2006-10-05 10:47: 46.458 KisMAC[4601] RalinkJack::Switched to channel 8
2006-10-05 10:47:46.691 KisMAC[4601] RalinkJack::Switched to channel 10
2006-10-05 10:47:46.944 KisMAC[4601] RalinkJack::Switched to channel 1
2006-10-05 10:47: 47.195 KisMAC[4601] RalinkJack::Switched to channel 3
2006-10-05 10:47:47.466 KisMAC[4601] RalinkJack::Switched to channel 5
2006-10-05 10:47:47.697 KisMAC[4601] RalinkJack::Switched to channel 7
2006-10-05 10:47: 47.945 KisMAC[4601] RalinkJack::Switched to channel 9
2006-10-05 10:47:48.194 KisMAC[4601] RalinkJack::Switched to channel 11
2006-10-05 10:47:48.435 KisMAC[4601] RalinkJack::Switched to channel 2
2006-10-05 10:47: 48.690 KisMAC[4601] RalinkJack::Switched to channel 4
2006-10-05 10:47:48.939 KisMAC[4601] RalinkJack::Switched to channel 6
2006-10-05 10:47:49.207 KisMAC[4601] RalinkJack::Switched to channel 8
2006-10-05 10:47: 49.448 KisMAC[4601] RalinkJack::Switched to channel 10
2006-10-05 10:47:49.698 KisMAC[4601] RalinkJack::Switched to channel 1
2006-10-05 10:47:49.950 KisMAC[4601] RalinkJack::Switched to channel 3
2006-10-05 10:47: 50.216 KisMAC[4601] RalinkJack::Switched to channel 5
2006-10-05 10:47:50.460 KisMAC[4601] RalinkJack::Switched to channel 7
2006-10-05 10:47:50.686 KisMAC[4601] RalinkJack::Switched to channel 9
2006-10-05 10:48: 22.421 KisMAC[4601] !!!!!set Rx control = ffff



Justin



On 10/5/06, Geoffrey Kruse < gkruse@xxxxxxxxx > wrote:
I need more information, this driver is still in the early stages. What device are you using specifically? Also, can you attach the full consol.log from the run?


Geoff

On Oct 4, 2006, at 11:12 PM, Justin Morris wrote:

I've tried that with builds r197-199 recently (from usb-drivers) and have not been able to get a dwl-g122 to read anything passively.

The console comes up as it is switching channels. There are networks here but it does not seem them.
RalinkJack::Switched to channel 3


Anything I am doing wrong?

Justin

On 10/1/06, devnullian@xxxxxxx < devnullian@xxxxxxx> wrote:
There's an article on the wiki about this, but, in short,
1)Get the Apple developer kit (with Xcode, etc.)--on your OS X disc
or download from Apple
2)Get subversion, then get svnX
3)Check out the source code from https://svn.binaervarianz.de/ kismac/
branches/usb-drivers
4)run compile.command
5)Application will be under /build/universal


Links and more details are on the wiki.
On Oct 1, 2006, at 12:56 PM, zer matt wrote:

> No, I just downoaded R196, installed it and run it. What I am going
> to do with the code from https://svn.binaervarianz.de/kismac/
> branches/usb-drivers ?
>
> I'm quite new to the Mac-world.... ;-)
>
> Zer
>
>
>>
>> Did you get the code from https://svn.binaervarianz.de/kismac/
>> branches/usb-drivers ?
>> If yes, then you should have the option in the prefs panel for
>> "usb device" instead of "usb prism2 device".
>> Select the usb device and you should be good to go.
>> On Oct 1, 2006, at 12:17 PM, zer matt wrote:
>>
>>> I just got a DWL-G122 vb1 usb dongle. I should work with Kismac.
>>> But the Ralink driver is not available to select in Kismac. How
>>> do I load them i passive mode?
>>>
>>> Zer
>>>
>>>
>>>
>>
>>
>
>
>











Other related posts: