[kismac] Re: Passive scanning on Intel Macs?
- From: "John Warren" <xaive1@xxxxxxxxx>
- To: kismac@xxxxxxxxxxxxx
- Date: Sun, 5 Mar 2006 20:51:36 -0800
I think it was here.
http://www.harmless.de/cocoa.html#rollover
On 3/5/06, Aldenwoods <aldenwoods@xxxxxxxxx> wrote:
> Thanks... I just located it myself about 30 secs ago. Where can I
> get the "RollOverButtonPalette". I remember seeing a thread last
> week on it.
> On Mar 5, 2006, at 6:40 PM, Geoffrey Kruse wrote:
>
> > You would have to modify /Sources/WaveDrivers/
> > WaveDriverAriportExtreme.m before you compile. I will be
> > committing this change in the next couple of days.
> >
> > Geoff
> > On Mar 5, 2006, at 8:13 AM, Aldenwoods wrote:
> >
> >> Where are these scripts located?
> >> I also discovered that the Apple.AirportBrcm4311 is located in
> >> the /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/
> >> I have updated the APMonitor mode = Yes.
> >>
> >> Thanks
> >>
> >>
> >>
> >> On Mar 4, 2006, at 6:48 PM, themacuser wrote:
> >>
> >>> You have to also modify the script in KisMAC to kextload,
> >>> kextunload -b com.apple.driver.AppleAirPortBrcm4311 instead of
> >>> com.apple.AirPort2 as well.
> >>> On 04/03/2006, at 2:42 PM, Aldenwoods wrote:
> >>>
> >>>> Just changed the key in Info.plist to <yes> for APMonitor mode,
> >>>> rebooted and I now get the following.
> >>>>
> >>>> "Could not load Monitor Mode for Airport Extreme. Drivers were
> >>>> not found."
> >>>>
> >>>> On Mar 3, 2006, at 5:51 PM, Geoffrey Kruse wrote:
> >>>>
> >>>>> Not yet, passive will not be possible on the mac book pro fro
> >>>>> some time. One could theoretically do passive scanning on an
> >>>>> iMac now if they were to manually put their card into monitor
> >>>>> mode. There is a key in the Info.plist inside the airport kext
> >>>>> called APMonitor mode. If you set this to true and reboot, you
> >>>>> might be able to do a passive scan.
> >>>>>
> >>>>> Geoff
> >>>>> On Mar 3, 2006, at 1:59 PM, Jonathan Burns wrote:
> >>>>>
> >>>>>> Any update on this?
> >>>>>> Just wondering if you were able to get it working?
> >>>>>>
> >>>>>> On 2/25/06, themacuser <themacuser@xxxxxxxxx> wrote:
> >>>>>>> I convinced someone with an Intel mac to give me the results
> >>>>>>> of those
> >>>>>>> 3 commands.
> >>>>>>>
> >>>>>>> I'll get the logs on x9.ath.cx in a minute.
> >>>>>>>
> >>>>>>> Here's the ioreg -l listing of the airport. (note that i
> >>>>>>> removed the
> >>>>>>> SSID and MAC to protect his privacy).
> >>>>>>>
> >>>>>>> Now, the interesting lines are:
> >>>>>>> "CFBundleIdentifier" = "com.apple.driver.AppleAirPortBrcm4311"
> >>>>>>>
> >>>>>>> It's not com.apple.AppleAirPort2 any more, so update the
> >>>>>>> scripts.
> >>>>>>>
> >>>>>>> "APMonitorMode" = No
> >>>>>>>
> >>>>>>> Theoretically, this would mean that if we reload it with this
> >>>>>>> changed, it CAN do monitor mode!
> >>>>>>>
> >>>>>>> "IOModel" = "Wireless Network Adapter (802.11 a/b/g)"
> >>>>>>>
> >>>>>>> 802.11a support :)
> >>>>>>>
> >>>>>>> "APValidChannels" =
> >>>>>>> (1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64,100,104,1
> >>>>>>> 08,112,1
> >>>>>>> 16,120,124,128,132,136,140,149,153,157,161,165)
> >>>>>>>
> >>>>>>> Damn 802.11a and it's extensive array of channels - how slow
> >>>>>>> are you
> >>>>>>> going to have to drive to scan THAT lot. Might as well try
> >>>>>>> and get
> >>>>>>> lid closed running support again so we can warwalk.
> >>>>>>>
> >>>>>>>
> >>>>>>> | | | +-o AirPortPCI_MM <class AirPortPCI_MM,
> >>>>>>> registered,
> >>>>>>> matched, active, busy 0, retain count 8>
> >>>>>>> | | | | {
> >>>>>>> | | | | "IOPacketFilters" =
> >>>>>>> {"IOEthernetWakeOnLANFilterGroup"=0,"IONetworkFilterGroup"=275}
> >>>>>>> | | | | "IOClass" = "AirPortPCI_MM"
> >>>>>>> | | | | "IOLinkSpeed" = 54000000
> >>>>>>> | | | | "CFBundleIdentifier" =
> >>>>>>> "com.apple.driver.AppleAirPortBrcm4311"
> >>>>>>> | | | | "IOProbeScore" = 0
> >>>>>>> | | | | "IOMinPacketSize" = 64
> >>>>>>> | | | | "IOMatchCategory" =
> >>>>>>> "IODefaultMatchCategory"
> >>>>>>> | | | | "IONameMatched" = "pci14e4,4312"
> >>>>>>> | | | | "IONameMatch" =
> >>>>>>> ("pci14e4,4311","pci14e4,4312","pci14e4,4324")
> >>>>>>> | | | | "IOSelectedMedium" = "00000080"
> >>>>>>> | | | | "IOLocale" = "Worldwide"
> >>>>>>> | | | | "IOGeneralInterest" = "IOCommand is not
> >>>>>>> serializable"
> >>>>>>> | | | | "IOVendor" = "Apple"
> >>>>>>> | | | | "IOActiveMedium" = "00000080"
> >>>>>>> | | | | "Power Management protected data" =
> >>>>>>> "{ theNumberOfPowerStates = 3, version 1, power state 0 =
> >>>>>>> { capabilityFlags 00000000, outputPowerCharacter 00000000,
> >>>>>>> inputPowerRequirement 00000000, staticPower 0,
> >>>>>>> unbudgetedPower 0,
> >>>>>>> powerToAttain 0, timeToAttain 25000, settleUpTime 0, timeToLower
> >>>>>>> 25000, settleDownTime 0, powerDomainBudget 0 }, power state 1 =
> >>>>>>> { capabilityFlags 0000b000, outputPowerCharacter 00000000,
> >>>>>>> inputPowerRequirement 00000400, staticPower 40,
> >>>>>>> unbudgetedPower 0,
> >>>>>>> powerToAttain 0, timeToAttain 25000, settleUpTime 0, timeToLower
> >>>>>>> 25000, settleDownTime 0, powerDomainBudget 0 }, power state 2 =
> >>>>>>> { capabilityFlags 0000f000, outputPowerCharacter 00000000,
> >>>>>>> inputPowerRequirement 00000002, staticPower 0,
> >>>>>>> unbudgetedPower 0,
> >>>>>>> powerToAttain 0, timeToAttain 25000, settleUpTime 0, timeToLower
> >>>>>>> 25000, settleDownTime 0, powerDomainBudget 0 },
> >>>>>>> aggressiveness = 0,
> >>>>>>> myCurrentState = 2, parentsCurrentPowerFlags = 00000002,
> >>>>>>> maxCapability = 2 }"
> >>>>>>> | | | | "IOMACAddress" = <001451xxxxxx>
> >>>>>>> | | | | "Power Management private data" = "{ this
> >>>>>>> object = 02050400, interested driver = 02110d00, interested
> >>>>>>> driver =
> >>>>>>> 02050400, driverDesire = 0, deviceDesire = 2,
> >>>>>>> ourDesiredPowerState =
> >>>>>>> 2, previousRequest = 2 }"
> >>>>>>> | | | | "APFeatures" = 1
> >>>>>>> | | | | "APCurrentSSID" = "<REMOVED>"
> >>>>>>> | | | | "IOProviderClass" = "IOPCIDevice"
> >>>>>>> | | | | "IOMediumDictionary" = {"00000080"=
> >>>>>>> {"Type"=128,"Speed"=11000000,"Index"=0,"Flags"=0}}
> >>>>>>> | | | | "IOModel" = "Wireless Network Adapter
> >>>>>>> (802.11
> >>>>>>> a/b/g)"
> >>>>>>> | | | | "IOFirmwareVersion" = "100.9
> >>>>>>> (3.120.28.3)"
> >>>>>>> | | | | "IOFeatures" = 0
> >>>>>>> | | | | "APMonitorMode" = No
> >>>>>>> | | | | "APCurrentChannel" = 6
> >>>>>>> | | | | "IOLinkStatus" = 3
> >>>>>>> | | | | "APCountryCode" = "XA"
> >>>>>>> | | | | "IOMaxPacketSize" = 1518
> >>>>>>> | | | | "APValidChannels" =
> >>>>>>> (1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64,100,104,1
> >>>>>>> 08,112,1
> >>>>>>> 16,120,124,128,132,136,140,149,153,157,161,165)
> >>>>>>> | | | | }
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >
> >
>
>
>
Other related posts:
