[kismac] Kismac questions

I have a Garmin eTrek Legend (s/w v.3.20) + keyspan usb->serial + 
latest Kismac publicly available.

I'm wondering if there is anything special I need to do to get Kismac 
to recognize it.  It surely detects the GPS, but even when set to NMEA 
In->Out, clicking on Map during active stumble says that it is not 
functioning properly.

However, when firing up MacGPSPro, I can track the stumble just fine.  
I was wondering if there is something I'm missing here.
I've installed GPSdrive from fink, but alas if Kismac does not 
recognize the stumbler I cannot produce AP locations on the track log 
and can only do post-calibration of map + track log from MGP without 
APs.

On another front...
Has anyone been successful when using both a prism2 card + airport card 
(inject/sniff respectively) for spoofed arp injection.  
Deauthentication seems to work, but when I try to use both for spoofed 
arp it pulls up the error dialog that something hasn't been 
configured.properly (whereas I see no other way to configure it -- plug 
in pcmcia card, select MacJack driver, restart Kismac, click scan, 
select inject arps upon finding a wepped AP)

Thanks a bunch!

--
Mark Grimes <mark@xxxxxxxxxxxx>
Stateful Labs

"Computers aren't intelligent, they just think they are."

Other related posts: