[kismac] Re: Decrypt Output

  • From: Alexis Ramel <musyne@xxxxxxxxxx>
  • To: kismac@xxxxxxxxxxxxx
  • Date: Thu, 6 Oct 2005 14:45:33 +0200

Or.. fink !
http://fink.sf.net/

The same as DarwinPorts, pick the one you want.

Alexis

Le 6 oct. 05 à 14:38, Ron Rosson a écrit :

You might want to try using darwinports
<http://darwinports.opendarwin.org/>. It tends to make installing unix utils
easier.
--
Ron Rosson
ron@xxxxxxxxxxxxx
http://www.oneinsane.net




From: Michael Peth <michaelpeth@xxxxxxxxx>
Reply-To: <kismac@xxxxxxxxxxxxx>
Date: Thu, 06 Oct 2005 14:25:15 +0200
To: <kismac@xxxxxxxxxxxxx>
Subject: [kismac] Re: Decrypt Output

I'm having all sort of trouble compiling Ettercap. I've installed the
prereq's it asks for fine. When I run ./configure it configures fine,
but then I get [Error 1: All Recursive]. I'd sooner just find a way to
read the decrypted kismac files than troubleshoot ettercap, I never have
much luck with comiling stuff in darwin. Let me know what you guys
think. Thanks


Erik Winkler wrote:


I recommend you take a look at the ettercap tool (http://
ettercap.sourceforge.net/). When analyzing wireless packet dumps you
can issue the command line:


ettercap -T -q --wep-key '128:s:\x11\x22\x33\x44\x55\x79\x69\x73\x71
\x76\x66\x54\x6E' -r kismacdump -m resultsfile.txt

Ettercap will decrypt the packets and show any clear text usernames
and passwords in the decrypted data stream.

On Oct 6, 2005, at 7:00 AM, Michael Peth wrote:


Hey everyone,
I just got kismac up and running last week and have begun sniffing
etc. I am running ibook with airport extreme so I'm not able to
inject or deauthorize, but when I do find a network and sniff it for
a while and then successfully crack the key, I am not able to join
the network. I played around with it for a while and then Saw the
decrypt feature and I load up the dump file in it and then put in
the key it cracked and it says it successfully decrypted with no
packets lost. From there I don't know what to do with the output
file because I dont have anything to open it. Any help would be
greatly appreciated, thanks in advance.
-Mike

















Other related posts: