[kismac] DWL-122 Firmware and Kismac

Hi, I got a DWL-122 HW Rev A1 this week to use with  Kismac. I get a lot of 
beachballs and lockups even when I follow the advice about changing to 
multichannel before start/stop. Actually, I have not been able to grab more 
data than 1Mb before freeze and timeout error in the console, it's really 
unstable... My question is: What firmware works best with the USBPrism2 driver? 
I'm sure I don't have the same as the developers.

My setup:
DWL-122 HW Ver A1
Primary 1.1.3
Station: 1.8.1

Console at startup:
2005-09-15 15:04:01.206 KisMAC[152] USBIntersilJack is now ready to start 
working.
2005-09-15 15:04:01.531 KisMAC[152] USBIntersilJack: Detected a Prism2 card
2005-09-15 15:04:01.570 KisMAC[152] USBIntersilJack: Firmware vendor 31, 
variant 1, version 1.7  <---  WRONG VERSION?!!
2005-09-15 15:04:01.571 KisMAC[152] USBIntersilJack: MAC 0x0 0x11 0x95 0xf2 
0x50 0x87

The Windows D-Link drivers:
D-Link Air USB Utility V3.2.1.40525 with Driver3.1.3-Tx 
Preamble Auto(cat)
(Available on Swedish and Taiwanese D-Link website)
updated my firmware automatically. Here's instructions, info and an archive 
with Prism2 Firmware which I intend to use alter the one I have:
http://linux.junsun.net/intersil-prism/

Thanks

Klas

Other related posts: