[kismac] Re: Compiling-problems on new Intel-iMac

  • From: Mike Williams <resu-cam@xxxxxxx>
  • To: kismac@xxxxxxxxxxxxx
  • Date: Thu, 16 Feb 2006 01:35:50 +0100


the app starts without problems.
AE active mode works well.
AE passive mode does not work "Could not enable monitor mode - Drivers were not found"


Am 15.02.2006 um 22:22 schrieb Geoffrey Kruse:

For those with an Intel Mac:


This version is completely untested on an intel machine since I don't have one. Use at your own risk. Please let me know what works / doesn't. This information will help me continue with the port.


I have OSX86 10.4.3 running on a P4 Prescott and a DWL-122 USB Prism2
dongle if its any help.

Will get an iMac Core Duo in the near future.

On 2/15/06, Geoffrey Kruse <gkruse@xxxxxxxxxxxxxx> wrote:
Please try the patch attached to ticket 15 in trac. It is probably
really broken, but it does compile a universal binary fine for me.
Feedback would be appreciated as I don't have an Intel mac to test on.

On Feb 11, 2006, at 11:12 AM, Geoffrey Kruse wrote
Unfortunately, there are some other problems besides the cpu flag.
While the cpu flag can be set differently for different
architectures, there is some altivec specific code that somehow
needs to be addressed.  Also, the atheros driver uses a binary only
hardware abstraction layer.  This issue will also have to be
addressed.  I am opening a ticket in trac for intel compilation,
however i expect it to take a fair amount of effort to get this to

On Feb 11, 2006, at 5:48 AM, Mike Williams wrote:

Ahh - I tried to set it to x86 or something - without this option
it works...
_but_ nor I get this problem.

I'm using a default installation of MacOS and developer-tools.
I was able to build release 65 without problem - after 65 no build
was compiled without problems.

Other related posts: