[kada] Re: (no subject)
- From: Mark <mchoedds@xxxxxxxxx>
- To: "kada@xxxxxxxxxxxxx" <kada@xxxxxxxxxxxxx>
- Date: Wed, 16 Oct 2013 16:55:15 -0400
Don't get Dexis bc you have to pay for every little thing for license fee if
you use their Dexis software and using Dentrix. Get something that you don't
have to use Dexis software.
Mark
Sent from my iPhone
> On Oct 16, 2013, at 12:24 PM, Michael Song <msongdds@xxxxxxxxx> wrote:
>
> Maggie,
>
> I've been using Gendex sensor last 9 years and still works fine.
> I am sure newer sensors have better image quality but mine still works.
> However, I am thinking about getting a Dexis sensor only because my
> hygienist keep complaining the Gendex size2 sensor is too big for smaller
> patients. Dexis has only one size sensor and contour corners and you can use
> dentrix image software directly.
> It seems to me these management software companies controls the device you
> can use not the other way around. Let me know if you have any input about
> Dexis.
>
> Michael Song
>
> Sent via the Samsung Galaxy Note® II, an AT&T 4G LTE smartphone
>
>
>
> -------- Original message --------
> From: Maggie <maggieleepak@xxxxxxxxx>
> Date: 10/14/2013 4:59 PM (GMT-05:00)
> To: kada@xxxxxxxxxxxxx
> Subject: [kada] Re: (no subject)
>
>
> Thank you Peter and Mark. I wanted something better then scan x. I
> currently have scan x n I had it for 5 yrs. Peter, what do you think of
> Gendex ?
>
> Sent from my iPhone
>
>> On Oct 14, 2013, at 2:47 PM, Mark Choe <mchoedds@xxxxxxxxx> wrote:
>>
>> Scan-X is a good choice.
>> I have been using for last 3 years and no problems.
>> No learning curve because it's just like film and it's thinner.
>> Cost to replace each plate is only $20, much cheaper than sensors.
>> Image quality is very good, same or better than film.
>> How long each plate last, it will depend on the users.
>> I only had to replace 2 plates, in 3 years.
>> I hope this helps.
>> Mark Choe.
>>
>>
>>> On Mon, Oct 14, 2013 at 2:07 PM, YAHOOMAIL SERVICE!!!
>>> <maggieleepak@xxxxxxxxx> wrote:
>>> Hi Everybody,
>>> I am looking into getting digital x-ray. Can KADA members recommend me
>>> anything from your past experience?
>>> from Maggie
>>
Other related posts: