[juneau-lug] Re: OpenBSD Gateway; A Whole Heap of Questions

you need to run dhcpd on your wireless card
On Mon, 18 Oct 2004, Steven 
Elliot wrote:

> Date: Mon, 18 Oct 2004 00:48:13 -0800
> From: Steven Elliot <patches5@xxxxxxx>
> Reply-To: juneau-lug@xxxxxxxxxxxxx
> To: juneau-lug@xxxxxxxxxxxxx
> Subject: [juneau-lug] OpenBSD Gateway; A Whole Heap of Questions
> 
> Hello,  I've been to a few meetings so you may or may not remember me but I 
> was hoping that someone with some OBSD experience could help me out.  I'm 
> trying to build a OpenBSD based router/gateway/firewall for my home lan.  The 
> whole thing should look similar to this:
>
> Internet --> Cable Modem --> OBSD --> Hub --> LAN Clients
>
> The gateway has three interfaces(external, internal and wireless).  I've been 
> able to get pf to do NAT and packet filtering between the two ethernet 
> external and internal interfaces.  I've also been able to get dhcpd to pass 
> out leases to LAN clients on the internal interface.  This all works more or 
> less.  The big problem is the wireless.
>
> I've been able to create my access point with the following script.
>
> #!/bin/sh
> #Used HOWTO --> http://www.unixcircle.com/features/802.11b_openbsd.php
> ifconfig wi0 inet up nwid hogwarts media DS11 mediaopt hostap
> wicontrol -e 1
> wicontrol -k 0xblahblahblah -v 1
> wicontrol -T 1
> wicontrol -f 11
> wicontrol -s "OpenBSD_AP"
>
> This script is run by rc.local and creates the interface as shown:
>
> wi0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        address: 00:05:5d:ee:6e:3e
>        nwid hogwarts
>        nwkey blahblahblah
>        powersave off
>        media: IEEE802.11 DS11 hostap
>        status: active
>        inet6 fe80::205:5dff:feee:6e3e%wi0 prefixlen 64 scopeid 0x3
>        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
>
> As I mention previously I can connect to the resulting AP with my wireless 
> clients.  However weird things that I don't understand start happening from 
> here on out.  For example, I can't seem to ping 192.168.1.1 from my wireless 
> clients, or I my wlan clients get IPs like 169.158.***.***.  This is 
> essentially where my gas tank of knowledge runs empty.  Do I,
>
> 1)Create bridge device between my wireless and internal interfaces?
> 2)Create seperate NAT rules for wireless interface?
> 3)Run dhcpd on my wireless interface?
>
> Any advice on the matter would be appreciated.  Thanks.
>
> Kevin Elliott
>
>
> ------------------------------------
> This is the Juneau-LUG mailing list.
> To unsubscribe, send an e-mail to juneau-lug-request@xxxxxxxxxxxxx with the 
> word unsubscribe in the subject header.
>

------------------------------------
This is the Juneau-LUG mailing list.
To unsubscribe, send an e-mail to juneau-lug-request@xxxxxxxxxxxxx with the 
word unsubscribe in the subject header.

Other related posts: