[juneau-lug] Re: Help!

As I remember, ide/atapi-cdrom support has to be disabled and scsi-emulation 
enabled. These selections are in the IDE, ATA and Block devices section. In 
the SCSI support section, enable SCSI support, SCSI disk and SCSI CD-ROM 
support. I also have Vendor-specific and SCSI generic support enabled. Can't 
remember if the last two are required. I'll check around and try and find the 
documentation that I used to set my system up with.

Chuck Hakari

On Wednesday 19 June 2002 05:40 pm, you wrote:
> It will read a disc which already has data on it, but will not recognize
> a blank disc. I believe it has something to do with it having to be
> recognized as a scsi drive. I think I have to turn on scsi emulation in
> the kernel, I'm not sure how to go about that. -Jim
>


------------------------------------
This is the Juneau-LUG mailing list.
To unsubscribe, send an e-mail to juneau-lug-request@xxxxxxxxxxxxx with the 
word unsubscribe in the subject header.

Other related posts: