Re: statement when jaws starts
- From: "Tracy" <teddybear25@xxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Sat, 25 Jul 2009 21:39:27 -0400
I tried your suggestion but it's still not working. I still think I'm pasting
the lines in the wrong place.
Tracy
----- Original Message -----
From: Rob
To: jfw@xxxxxxxxxxxxx
Sent: Saturday, July 25, 2009 10:03 PM
Subject: Re: statement when jaws starts
I had the same error.
here is what I did to fix it.
replace the first line of the script you coppied with the one below.
just change the name from Rob to your name.
Say ("Welcome Rob,", OT_message)
it seems that a coma after the quote sign was missing.
HTH
Rob
----- Original Message -----
From: Tracy
To: jfw@xxxxxxxxxxxxx
Sent: Saturday, July 25, 2009 4:57 PM
Subject: Re: statement when jaws starts
Good evening list,
I've been trying to change the message when Jaws starts but am getting the
following error message. Does anyone know what I may be doing wrong?
thanks in advance
Tracy
Compile Error
Function Say requires between 2 and 3 parameters not 1
OK
----- Original Message -----
From: Shannon Hannah
To: jfw@xxxxxxxxxxxxx
Sent: Saturday, July 25, 2009 1:08 PM
Subject: statement when jaws starts
Alice, my instructions are very much the same as what Bob posted. His
were better in point form, but I have posted the instructions I use below,
which I believe I got from the old jfwlite list. I added the first line as a
welcome message but you certainly can omit this first line. If you do want to
have a message you can put whatever you want in here. Hope this helps and if
you want write me off the list at:
hannah74@xxxxxxx
Shannon
Announce Jaws version number and Date and Time on Load
If you have more than one version of Jaws on your system, sometimes it is
easy to get confused what version is loaded. This script will say the number
of Jaws that you are using, plus it will say the date and time when you first
load jaws.
Press jaws key+0
press control+shift+d to get to the default script file,
Press control L for the script list and arrow down to AutoStartEvent and
enter. You are now in the auto start event script
arrow down to the line that says
let DefaultFirstTime = 1
Go to the end of that line and enter and after that line paste in the
following lines. Of course change the version number to reflect the version
and build of Jaws you are making the script change for.
Say ("Welcome Shannon , ")
Say ("Version 10", OT_message)
Say ("Loaded on", OT_Message)
SayUsingVoice (VCTX_PCCursor, SysGetDate (), OT_No_Disable)
Say ("at", OT_Message)
SayUsingVoice (VCTX_PCCursor, SysGetTime (), OT_No_Disable)
Then press control S to compile the script and alt f4 to leave the script
manager.
Other related posts: