Re: request 4 help with RDP

Hiya!
I have not yet tried it!! and if I may ask you what does not work?
  ----- Original Message ----- 
  From: Steven Hicks (HICKSSM) 
  To: jfw@xxxxxxxxxxxxx 
  Sent: Friday, April 24, 2009 9:36 AM
  Subject: Re: request 4 help with RDP


  Hi,

  just to add, as far as I am aware, VNC doesn't work with access technology 
anyway.
    ----- Original Message ----- 
    From: ahmed 
    To: jfw@xxxxxxxxxxxxx 
    Sent: Thursday, April 23, 2009 6:02 PM
    Subject: Re: request 4 help with RDP


    Hi Tom;
    VNC is a remote desktop software, another alternative to RDP; YOu can get 
more information on it by going to this URL
    http://www.realvnc.com/
    I have not yet used it but it was another alternative to RDP if RDP did not 
work for me;
    Also Below is some help for whoever want to run Jaws with RDP
    Client side:
    First install jaws on the client machine and make sure it has remote access 
enabled;
    You can go to INSERT+J AND THEN ABOUT AND "IT WILL SAY REMOTE ENABLED";
    Second go to the insert+j and then basic and then advance;
    then check the 
    Check Try Remote Access Speech on startup 
    and also 
    Check Try Remote Access Braille on startup (if you want braille support)
    Check Use Authorization from PAC Mate (if you have it)
    Check Enable Remote Access Client(you must check it or otherwise no speach)
    Check Enable Remote Access Server (Check it if you want your version of 
jaws on server to look for the authorization)
    When checked, JAWS can search for product updates. 
    Server side:
    Then connect to the server using MSTSC in the start menue+run and type MSTSC

    after giving the server IP address and the user name and password
    insert the jaws cd and then type in the run dialogue box
    d:\JawsVersion.exe /remote
    then it will run the usual jaws setup staff and then install typical and 
then next;
    However, if you need to avoid the setup questions you can do  /
    SilentServer 
    and it will install without any promt;
    Then do not follow jaws because it will ask you to reboot the server;(in my 
case it did and I just ignored it)
    then jaws will run normally and if it asks you to activate just unload it 
and reload it 
    Because it will be activated by the client authorazation;

    If any one has problem you can email me  and good  luck with RDP 
experiences;



      ----- Original Message ----- 
      From: Bissett, Tom 
      To: jfw@xxxxxxxxxxxxx 
      Sent: Wednesday, April 22, 2009 5:25 PM
      Subject: RE: request 4 help with RDP


      Hi Ahmed,  VNC?  I guess not.  What exactly is it?  

      Tom Bissett
      BMO Financial Group
      Technology and Operations 
      Integrated Client Solutions
      Tel: (416) 549-6514
      E-Mail tom.bissett@xxxxxxx 





--------------------------------------------------------------------------
      From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On 
Behalf Of ahmed
      Sent: Wednesday, April 22, 2009 11:09 AM
      To: jfw@xxxxxxxxxxxxx
      Subject: Re: request 4 help with RDP


      Hi Tom !
      thanks for the feedback;
      But have you used VNC to remotely connect!
      if yes how did jaws work?
      Thanks in advance as always!
      ----- Original Message ----- 
        From: Bissett, Tom 
        To: jfw@xxxxxxxxxxxxx 
        Sent: Wednesday, April 22, 2009 2:47 PM
        Subject: RE: request 4 help with RDP


        Hi Ahmed,  unfortunately you need to install jaws on the servers as 
well as your workstation.  There is no work around.  I work in a similar 
environment where I need to access servers in this way.  Having to reboot them 
can be an issue.  Also we have been moving to ESX virtual servers and jaws 
won't run on them.  Jaws keeps crashing the virtual servers.  It is becoming a 
real problem.
        Depending of what kind of work you need to do on the server.  For 
troubleshooting I will often map to the servers drives and retrieve log files.  
Also if you map to the server C drive you can then access the windows event 
logs through the event viewer on your work station.
        So there are some things you can do without remoting into the server 
but it is limited.
        Regards
        Tom Bissett
        BMO Financial Group
        Technology and Operations 
        Integrated Client Solutions
        Tel: (416) 549-6514
        E-Mail tom.bissett@xxxxxxx 





------------------------------------------------------------------------
        From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On 
Behalf Of ahmed
        Sent: Tuesday, April 21, 2009 5:56 PM
        To: jfw@xxxxxxxxxxxxx
        Subject: request 4 help with RDP


        Hi their!
        I am using Version Jaws 9.0.2169   pro with XP pro;
        I am trying to connect to several servers to maintain them via 
Microsoft Remote desktop (RDP)
        It says in the jaws documentation that I need to install jaws on the 
server machine;
        and I have all ready have jaws on my client machine;
        Therefore my question is that I do not want to install jaws on every 
server that I am maintaining and it is not visible to reboot the server after I 
install jaws!
        so what can I do and is their any other way of actually getting RDP 
working with jaws without installing jaws on the server?
        Thanks in advance as always!
  
-----------------------------------------------------------------------------------------
  The information in this e-mail and any attachments is 
  confidential and is intended for the attention and use of the 
  named addressee(s). It must not be disclosed to any other 
  person without our authority. If you are not the intended 
  recipient, or a person responsible for delivering it to 
  the intended recipient or are aware that this e-mail has been 
  sent to you in error, you are not authorised to and must not 
  disclose, copy, distribute, or retain this message or any part of it.

  We sweep all outgoing messages for the presence of computer 
  viruses. However, we cannot accept any responsibility for any 
  loss or damage to your systems due to viruses or malicious 
  code not detected.

  The statements and opinions expressed in this message are 
  those of the author and do not necessarily reflect those of the 
  organisations within the Cornwall & Isles of Scilly Health 
  Community.

  This email may be disclosed under the Freedom of Information 
  Act 2000 or the Environmental Information Regulations 2004.
  
-----------------------------------------------------------------------------------------

Other related posts: