RE: power management and jaws problem solved

  • From: "Chip Orange" <Corange@xxxxxxxxxxxxxxx>
  • To: <jfw@xxxxxxxxxxxxx>
  • Date: Sat, 20 Mar 2004 19:43:09 -0500

yes, and so do I.

Troy, what brand/model of pc are you having this issue with?



> -----Original Message-----
> From: David Poehlman [mailto:poehlman1@xxxxxxxxxxx]
> Sent: Wednesday, March 17, 2004 8:42 PM
> To: jfw@xxxxxxxxxxxxx
> Subject: Re: power management and jaws problem solved
>=20
>=20
> this is indeed interesting as I am using windows xp pro on a=20
> laptop and go
> into and out of stand by with no problems.
>=20
> ----- Original Message -----=20
> From: "Troy Sullivan" <sullidog_2001@xxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Wednesday, March 17, 2004 7:10 PM
> Subject: power management and jaws problem solved
>=20
>=20
> Hi all. I did as suggested and contacted fs. They told me to=20
> never ever ever
> use power management as it causes this sort of problem for=20
> many jaws users,
> wich means in your settings of power management set=20
> everything to always
> on/never. so Walter you were right, never use power=20
> management. However, if
> you do like to use power management, they recommend you get a=20
> dongle wich
> they offered to me free of charge. Just wanted to post this=20
> in case someone
> would have a similar problem down the road. Thank you all for your
> suggestions. To refresh since I don't have the orriginal=20
> message, jaws would
> go into demo mode after leaving a power management setting.
> Troy
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the=20
> subject line.
>=20
> If you have any concerns about the list, post received from=20
> the list, or the
> way the list is being run, do not post them to the list.=20
> Rather contact the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>=20
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to=20
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the=20
> subject line.
>=20
> If you have any concerns about the list, post received from=20
> the list, or the way the list is being run, do not post them=20
> to the list. Rather contact the list owner at=20
> jfw-admins@xxxxxxxxxxxxxx
>=20
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx

Other related posts: