Re: jfw 10, vista problem?
- From: "Philip" <phall-eml1@xxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Fri, 20 Mar 2009 05:35:14 -0400
good point, i'll check it out. I forgot to check if they are correct. Many
Thanks for the suggestion.
----- Original Message -----
From: Dave Carlson
To: jfw@xxxxxxxxxxxxx
Sent: Thursday, March 19, 2009 11:09 PM
Subject: Re: jfw 10, vista problem?
Just to be sure, are the screen resolution and color depth set properly?
----- Original Message -----
From: Philip
To: jfw@xxxxxxxxxxxxx
Sent: Thursday, March 19, 2009 6:14 PM
Subject: jfw 10, vista problem?
After installing jfw 10 on a machine running vista business, we are
experiencing the following problems. I am not sure if it is a jfw related
problem however.
I can not run most windows related programs such as windows update, control
panel, and others. When I highlight one of these programs and press enter, as
far as I can determine, absolutely nothing happens.
For example, if I am on the start menu, and arrow down to windows update
and press enter, I windup on the clock.
If I am in internet explorer, open the tools menu and arrow down to windows
update, press enter, I end up on the page I started with, in this case, google.
I can get into control panel, only using run and using a command line such
as control timedate.cpl.
I have done many google searches and tried some of the suggestions I found
without any result.
Has anyone seen this using jfw?
If not, I'll continue looking for an unrelated solution.
Thanks.
Phil
Other related posts:
