RE: jaws cutting into line

Sometimes 100% doesn't work.  Try changing it to 75%.  That seems to work
here.  The other thing you can try is to set your view to print layout.
Then set the zoom to page width.  That works well too.
  -----Original Message-----
  From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]On Behalf
Of Judith Bron
  Sent: Thursday, May 08, 2008 10:51 PM
  To: jfw@xxxxxxxxxxxxx
  Subject: Re: jaws cutting into line


  Thanks Don.  The zoom is set to 100 percent already.  Judith
    ----- Original Message -----
    From: Don Moore
    To: jfw@xxxxxxxxxxxxx
    Sent: Thursday, May 08, 2008 10:23 PM
    Subject: Re: jaws cutting into line


    Hi Judith,

        Try going to the View Menu by pressing alt v. Then, cursor up to
Zoom and press Enter. Then, cursor up and down through the various
percentage options; I have mine set on 100% and that seems to do it for me.

        Hope this helps,

        Don
      ----- Original Message -----
      From: Judith Bron
      To: jfw@xxxxxxxxxxxxx
      Sent: Thursday, May 08, 2008 6:00 PM
      Subject: jaws cutting into line


        Hi Guys, I know I've asked about this problem before but now it is
unbearable.  While I am reading back a word document line by line or in say
all jaws leaves off part of the last word read or entire blocks of text.
I'm working with jaws 7.1.  I tried updating the screen, maximizing the
screen and a combination of both.  Is there any tip that will alleviate this
problem?  Thanks, Judith

Other related posts: