Re: Spy bot veruss add aware and using jaws

Hi Tracy,
1. Open Ad aware and make sure the window is maximized
2. Tab to the scan now button and hit space bar
3. Now this is where you choose the scanning mode
4. Now Jaws won't read the choices, but there are three listed in this
order: 1 default system scan, 2 custom scan, and 3 quick scan.
5. If you will root Jaws to PC (Insert+Jaws cursor key), and arrow up to the
top of the window, then arrow down until you hear 'select scanning mode'.
Now arrow down one more time and you should hear the first choice defualt
scanning mode.  Make sure the radio button is checked for this one.  The
defualt scanning mode is the longest and thoroughest scan.  If it is not
checked, you will have to move the Jaws cursor over to the radio button and
left mouse click on it to activate it.  If it is checked, then your ready to
scan.  Hit control+N to start the scan.
Hope this helps,
Chris Chaffin


----- Original Message ----- 
From: "Tracey" <teddybear2000@xxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Thursday, June 10, 2004 10:46 AM
Subject: Re: Spy bot veruss add aware and using jaws


> Good morning David
>
> Yes I have the scripts. When I had the previous version of Ad-aware it was
> taking me 24 minutes to do a scan, since I updated to version 6.0 it now
> only takes 4.5 minutes.
>
>  Before it was scanning approximately 65,000 files and now it only scans
> approximately 43,000 files.  I would like to configure this version to do
a
> deep scan so that it will scan all the files.
>
> Tracey
>
> ----- Original Message ----- 
> From: "david the wild-thing" <d.h.whitehead@xxxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Thursday, June 10, 2004 10:30 AM
> Subject: Re: Spy bot veruss add aware and using jaws
>
>
> > Hi, did you download and install the scripts for adaware?  the scripts
can
> > be found at: wwwjfwlite.com  on the programs page.  the scripts will
need
> to
> > be installed in,  c:\jaws50\settings\enu folder.  When you tab you
should
> > hear all the buttons.  Scan now, settings, web
> > update, etc.  You can press the space bar on a button to activate it.
> > When you press insert H you should get hotkey help.
> > To begin, press control S for the scan now button.
> > You should hear select a scanning option, but all you have to do is
press
> > control N for the next button.
> > As it scans you should hear messages like scanning drive C.
> > When it is done, you should hear finished and how many objects it found.
> > If no spyware was found, tab to finish and press the space bar.
> > If spyware was found, press control N for the next button.
> > This is where it lists the spyware.  Jaws can't read this list,
> > even with the jaws cursor.
> > But if you press control M for mark all it should say all items were
> checked
> > and they should have been.
> > Press control N for next.
> > A dialog from ad aware should come up with an okay button.  For now use
> your
> > jaws cursor or press insert B to read the dialog about the number of
items
> > ad aware will remove.
> > Press the space bar on the okay button.
> > You are done.
> >
> > You can look at the logs in C:\Program Files\Lavasoft\Ad-aware 6\Logs
> > with notepad to see what spyware was removed.
> >
> > You can go to C:\Program Files\Lavasoft\Ad-aware 6\Quarantine and delete
> > the files that you find in that folder to delete all the files in
> > quarantine.  It will have one file for each time you ran an ad aware
scan.
> >
> > Remember it is just as important now to keep your reference files
> > up to date in ad aware 6 as it was before. Now you do it from within ad
> > aware
> > 6 itself instead of using the separate refupdate program. Here is what
you
> > need to do. Remember in all these dialogs just press insert B or use
your
> > jaws cursor to review the information.
> > Tab to the web update button and press the space bar.
> > Review the information.
> > Tab to connect and press the space bar.
> > It will tell you if you are up to date, and just press the space bar on
> > okay.
> > If you need to update your ref files, it will tell you a newer version
is
> > available and ask you if you wish to download them. Again, just press
the
> > space bar on okay. When it is done, you can tab to the finish button and
> > press the space bar.
> >
> >
> > --
> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> > To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> > Archives located at: http://www.freelists.org/archives/jfw
> >
> > If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
contact
> the list owner at jfw-admins@xxxxxxxxxxxxxx
> >
>
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: http://www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather contact
the list owner at jfw-admins@xxxxxxxxxxxxxx

--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx

Other related posts: