Re: Sound card question
- From: "Kristeen Hughes" <khug.1@xxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Tue, 6 May 2008 07:33:16 -0400
Thanks Don,
I'll insert that line and give it a go.
----- Original Message -----
From: "Don Moore" <donmoore@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Monday, May 05, 2008 3:56 PM
Subject: Re: Sound card question
Hi Kristeen,
In order to have JAWS running off the on-board sound card (i.e. the
RealTech sound card) instead of the SoundBlaster, you must insert the
following line into the jfw.ini file of the JAWS version you are using:
Synth1Port=Realtek HD Audio rear output
This line must be inserted in the new jfw.ini file each time you upgrade
to a new version of JAWS; otherwise, JAWS will run off the SoundBlaster
card just like everything else on your PC. The line must be inserted just
above the first line that starts with Synth2. The path for the jfw.ini
file for JAWS 9.0 is:
C:\Program Files\Freedom Scientific\Jaws\9.0\jfw.ini
Hope this helps,
Don
----- Original Message -----
From: "Kristeen Hughes" <khug.1@xxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Monday, May 05, 2008 10:38 AM
Subject: Sound card question
Hello,
I am new to the list and so excuse me if this is a boring and
much-covered issue.
I have purchased a Soundblaster type of internal sound card for my
desktop computer. The computer is a Dell and its onboard card is a
Realtek High Definition Audio. I want to route Jaws so that it comes
through that card and all other sound stays with the new Soundblaster. I
have tried a couple of suggestions and they didn't work. I know there's a
way to do it because I've seen it in a neighbor's computer, but they
don't remember how it's done. I looked at their JFW.ini file and I see no
reference to it, but that's where they say the modification must go.
Could someone advise me, please?
Kristeen M Hughes
khug.1@xxxxxxxxxxxxx --
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
