Re: Prometric approved
- From: "Marie Nelson" <thebkkpr@xxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Tue, 6 Apr 2004 14:59:22 -0700
Jim, you can run Jaws from a CD without installing it to the computer on
which you will be testing. find out if this is acceptable and if so the
directions from Debbie Scales are below. Marie
"portable Jaws". That you can put jaws on a CD and have jaws run
automatically from the CD on a machine that
didn't have Jaws. Here are those instructions. Of course change 450 to
your version of Jaws, such as Jaws50.
Yes put the Jaws450 folder on the CD.
Then put a file called autorun.inf and in that file have these two lines
exactly.
[autorun]
open=Jaws450\jfw.exe
so when you browse the cd, you have two things jaws450 which is a folder,
then your autorun file.
then push the cd in and jaws will start.
It will run in demo mode unless you put an auth key on the machine or in the
floppy drive of the machine.
Have jaws exactly how you want it configured before you copy the folder,
because you can't make any configuration changes on the CD.
Debbie
----- Original Message -----
From: "Jim Talley" <nrg.jim@xxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Tuesday, April 06, 2004 11:01 AM
Subject: Prometric approved
Hi Listers, I have just received approval from Prometric special needs
department in regards to my blindness, I will be testing for Microsoft
office users specialist certification in Excel 2002.I have been told I will
have a reader for the exam and extra time for completion of the exam. Now
here is what perplexes me they will not allow me to install Jaws on the test
computer. Have any of you tested with Prometric under these conditions,
maybe you can give me a clue as to how this is possible. immense thanks
upfront!
(DEAN of ADMISSIONS) BO DIDDLEY TECH
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
