Re: Jaws and 2 sound cards
- From: "Blade" <info.rczenterprise@xxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Thu, 11 May 2006 05:06:46 -0700
Troy, no, you don't need to change it. just copy and paste it on where your
jaws application installed. Before you paste the file, you need to unload Jaws
then, you paste the file. While Jaws unload, you can use narrator and if you
are done, you can unload narrator and load Jaws again.
HTH
Blade
----- Original Message -----
From: Troy Burnham
To: jfw@xxxxxxxxxxxxx
Sent: Wednesday, May 10, 2006 10:12 AM
Subject: Re: Jaws and 2 sound cards
Hi again All,
When I downloaded the eloq file that I need to paste to make this work it
has a jls extension, is that right or do I need to change it to jss?
Thanks again.
Troy
----- Original Message -----
From: "Allan Wong" <allanwkf@xxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Wednesday, May 10, 2006 7:47 AM
Subject: Jaws and 2 sound cards
hi Troy,
beside adding that line, you also need to install a patch file for
eloquence. please refer to the following URL
http://www.freedomscientific.com/fs_support/BulletinView.cfm?QC=432
hth
Allan Wong
----- Original Message -----
From: "Troy Burnham" <tburnham@xxxxxxxxx>
To: "jfw" <jfw@xxxxxxxxxxxxx>
Sent: Wednesday, May 10, 2006 20:11
Subject: Jaws and 2 sound cards
Hi All,
I've got a USB sound card plugged in and I'm trying to get just Jaws to use
it and everything else to use the default onboard card. I'm running Jaws
7.0, do I need to do anything else other than adding a line to the jfw.ini
file? And regarding that line in the jfw.ini file, in the example from the
Freedom Scientific page they use the SBLive card and at the end of the line
they have the word wave written, does anybody know if that is just part of
the name for the SBLive card or if I would need to put wave at the end of
the line that I add for my USB card? Right now the line that I added looks
like this:
Synth1Port=USB Audio
Thanks.
Troy
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the
list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
