Re: [JFW] JFW and Roxio CD Label Creator

Hi Chris!!
I found that Roxio 5 platinum has some accessibility issues, and the 
labeller was very difficult to read.

What you can do, is use microsoft word to do your labels.  you simply 
use a template document for laying out your label.

I had to go to the office online website to find a template that did 
what my client wanted.  You must also use the right avery label type 
with the template you choose, as some have different options.

e.g..  you can print a label for the CD, and a label for the spine of 
the case.

cheers

Craig

Chris Smart wrote:

>Those would be the new double-sided recordable DVD's.
>I was asking more about the single-sided CDR's, and to get this back on 
>topic, the accessibility of the various labeling programs out there with JFW.
>Chris
>
>At 01:46 PM 6/29/2004, you wrote:
>  
>
>>Hi guys!!
>>I wouldn't pay much heed to this, as it is completely WRONG!!
>>
>>The label, if used will go on an unrecorded side of the disk.  Keep in
>>mind, there are CD''s that can be recorded on both sides.  I would not
>>recommend this for a blind/vision impaired person, as they would always
>>be getting their fingers on some recorded surface.
>>
>>Cheers
>>
>>Craig Goodenough
>>
>>Francis Daniels wrote:
>>
>>    
>>
>>>Here's another snip from Fred Langa's article, found online at www.langa.com
>>>
>>>"The problem with glue-on labels is that they cover the data surface of the
>>>CD. The glue from the label goes right on top of the foil that covers the
>>>CD's data-carrying dye. The foil is very, very thin and may itself be
>>>damaged by the label or glue; or may allow volatile chemicals from the glue
>>>to diffuse through to the dye layer, damaging it and the data it contains."
>>>
>>>Francis
>>>
>>>--
>>>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>>To unsubscribe from this mailing list, send a message to 
>>>      
>>>
>>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>>    
>>
>>>Archives located at: http://www.freelists.org/archives/jfw
>>>
>>>If you have any concerns about the list, post received from the list, or 
>>>      
>>>
>>the way the list is being run, do not post them to the list. Rather 
>>contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>    
>>
>>>
>>>      
>>>
>>--
>>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>To unsubscribe from this mailing list, send a message to 
>>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>>Archives located at: http://www.freelists.org/archives/jfw
>>
>>If you have any concerns about the list, post received from the list, or 
>>the way the list is being run, do not post them to the list. Rather 
>>contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>    
>>
>
>--
>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>To unsubscribe from this mailing list, send a message to 
>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>Archives located at: http://www.freelists.org/archives/jfw
>
>If you have any concerns about the list, post received from the list, or the 
>way the list is being run, do not post them to the list. Rather contact the 
>list owner at jfw-admins@xxxxxxxxxxxxxx
>
>  
>


--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx

Other related posts: