Re: JAWS Basic Training...
- From: Chris Skarstad <toonhead5@xxxxxxxxxxx>
- To: jfw@xxxxxxxxxxxxx
- Date: Tue, 08 Feb 2005 17:04:14 -0600
hi folks
this is quite simple, so let's take this step by step.
1. Put your program cd in the drive if it's not already in there.
2. When the instalation dialogue box comes up, tab until you hear browse cd
button.
3. Then navigate to the training folder and there should be a few folders
within that folder. Press control plus a to select them all or if you only
want certain ones, simply select them.
4. Next go back to the drive your copy of JAWS is on, and then go to the
following path:
c:\program files\freedom scientific\jaws\6.0\training\enu
and within that folder, simply paste all the files you copied from the cd.
5. Next open up FS reader demo and tab to the list view of available daisy
books and choose the one you want. It'll take a few seconds for it to
load. Then simply read on from there or listen to the files and just go on
from there.
Hope that helps. by the way, any daisy book can read these lessons, but FS
reader demo will only read books produced by FS. the full version of FS
reader will read any daisy book.
I found all this out by reading the FS website and listening to the basic
training.
At 04:49 PM 2/8/2005, you wrote:
>The daisy reader files remain a mystery to me, the instructions I posted
>pertain only to the HTML and MP3 lessons.
>----- Original Message -----
>From: "Sean McMahon" <smcmahon@xxxxxxxx>
>To: <jfw@xxxxxxxxxxxxx>
>Sent: Tuesday, February 08, 2005 1:53 PM
>Subject: Re: JAWS Basic Training...
>
>
> > Can you use any daze(spelling?) reader to read the fs training material?
> > Are
> > these things copy-protected?
> > Sean
> > ----- Original Message -----
> > From: "Jim Talley" <nrg.jim@xxxxxxxxxxxxx>
> > To: <jfw@xxxxxxxxxxxxx>
> > Sent: Tuesday, February 08, 2005 12:51 PM
> > Subject: Re: JAWS Basic Training...
> >
> >
> > What worked for me was to insert the CD in the rom drive, go to the start
> > menu run dialog type in D: hit enter Jaws will read items in the list
> > view,
> > arrow-down to training hit enter , then select basic training hit enter
> > again this will give you access to the HTML and MP3 lessons.
> > ----- Original Message -----
> > From: "Horspool, Matthew F." <drjaws@xxxxxxxxxxxxxxxx>
> > To: <jfw@xxxxxxxxxxxxx>
> > Sent: Tuesday, February 08, 2005 11:00 AM
> > Subject: JAWS Basic Training...
> >
> >
> >> Hi Chris,
> >> I can't find anything on installation anywhere in the basic training...
> >> Could I have some pointers please?
> >>
> >> Matthew
> >>
> >> ----- Original Message -----
> >> From: "Chris Skarstad" <toonhead5@xxxxxxxxxxx>
> >> To: <jfw@xxxxxxxxxxxxx>
> >> Sent: Tuesday, February 08, 2005 6:54 AM
> >> Subject: Re: JFW 6.0 installation?
> >>
> >>
> >> Hi. No no no, it is perfectly all right to put in your authorization cd
> >> first.
> >> That's how I did it, and in factthat's how it's done in the JAWS basic
> >> training.
> >> So it is perfectly ok to do that. I guess some people on the list don't
> >> have the auto insert notification turned on. If you're having trouble
> >> getting the cd to auto run, all you have to do is type something like,
> >> d:\setup, where d is your drive letter. obviously if your cd drive is a
> >> different letter, you would exchange d with the letter for your own
> >> drive.
> >> so again, you would type a d or whatever your drive letter is, followed
> >> by
> >> a colon, followed by a back slash, and then the word setup. and then
> >> press
> >> enter and your cd *should* begin to run.
> >>
> >>
> >>
> >> At 10:01 PM 2/7/2005, you wrote:
> >>>I put the program cd in first and it did it's install thing was very easy
> >>>and then it asked me to put the authorization cd in the drive. It was
> >>>very
> >>>straight forward. I wonder if people are putting the authorization cd in
> >>>first and I guess you shouldn't do that.
> >>>
> >>>
> >>>
> >>>web site
> >>>www.rellek.com/stevegomes
> >>>phone 720-747-4990
> >>>----- Original Message -----
> >>>From: "AB7HW Dick Lee Chrisman" <ab7hw@xxxxxxx>
> >>>To: <jfw@xxxxxxxxxxxxx>
> >>>Sent: Monday, February 07, 2005 8:52 PM
> >>>Subject: JFW 6.0 installation?
> >>>
> >>>
> >>> > Hello Group
> >>> > I too received my JFW version 6.0 CD today!
> >>> > Interesting couple of things though?
> >>> > 1. I put the Authorization CD into the drive and run it in, but
> >>> > nothing
> >>> > happens it does not speak or do any thing?
> >>> > 2. I then put in the program CD and again nothing no auto start
> >>> > nothing.
> >>> > Everything on this computer runs normally other CD's self start and
> >>> > install
> >>> > OKAY.
> >>> > I am running a Pentium 4, 2.8 GigHz, 512 RAM, 60 Gig of free hard
> >>> > drive
> >>> > space and JFW 5.00.844.
> >>> > Are you doing any thing to start the JFW 6.0 CD, either the
> >>> > Authorization
> >>> > or
> >>> > program CD?
> >>> > Dick
> >>> >
> >>> >
> >>> > --
> >>> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >>> > To unsubscribe from this mailing list, send a message to
> >>> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
> >>> > line.
> >>> > Archives located at: //www.freelists.org/archives/jfw
> >>> >
> >>> > If you have any concerns about the list, post received from the list,
> >>> > or
> >>> > the way the list is being run, do not post them to the list. Rather
> >>> > contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >>> >
> >>>--
> >>>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >>>To unsubscribe from this mailing list, send a message to
> >>>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> >>>Archives located at: //www.freelists.org/archives/jfw
> >>>
> >>>If you have any concerns about the list, post received from the list, or
> >>>the way the list is being run, do not post them to the list. Rather
> >>>contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >>
> >> --
> >> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >> To unsubscribe from this mailing list, send a message to
> >> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> >> Archives located at: //www.freelists.org/archives/jfw
> >>
> >> If you have any concerns about the list, post received from the list, or
> >> the way the list is being run, do not post them to the
> >> list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >>
> >>
> >>
> >> --
> >> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >> To unsubscribe from this mailing list, send a message to
> >> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> >> Archives located at: //www.freelists.org/archives/jfw
> >>
> >> If you have any concerns about the list, post received from the list, or
> >> the way the list is being run, do not post them to the list. Rather
> >> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >>
> >
> > --
> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> > To unsubscribe from this mailing list, send a message to
> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> > Archives located at: //www.freelists.org/archives/jfw
> >
> > If you have any concerns about the list, post received from the list, or
> > the way
> > the list is being run, do not post them to the list. Rather contact the
> > list
> > owner at jfw-admins@xxxxxxxxxxxxxx
> >
> > --
> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> > To unsubscribe from this mailing list, send a message to
> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> > Archives located at: //www.freelists.org/archives/jfw
> >
> > If you have any concerns about the list, post received from the list, or
> > the way the list is being run, do not post them to the list. Rather
> > contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >
>
>--
>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>To unsubscribe from this mailing list, send a message to
>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>Archives located at: //www.freelists.org/archives/jfw
>
>If you have any concerns about the list, post received from the list, or
>the way the list is being run, do not post them to the list. Rather
>contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
