Re: JAWS 4.51 and Internet Explorer...

Or put a semicolon in front of the line to disable it, so that you could 
take it out later.
At 10:13 PM 11/28/2003, you wrote:
>All you would have to do is add the line to the script file again.  If 
>you're unsure about it though, I would recommend backing up your 
>default.jss file to another location.
>Grant
>   ----- Original Message -----
>   From: Heeru Chandnani
>   To: jfw@xxxxxxxxxxxxx
>   Sent: Friday, November 28, 2003 7:56 PM
>   Subject: RE: JAWS 4.51 and Internet Explorer...
>
>
>   Is there a way to undo this? What I mean is, is there a way of making =
>   JAWS start speaking the whole page if it is set to just saying The Page =
>   has 99 links?
>
>   Heeru
>
>
>   -----Original Message-----
>   From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]On
>   Behalf Of Grant Hardy
>   Sent: Saturday, November 29, 2003 8:17 AM
>   To: jfw@xxxxxxxxxxxxx
>   Subject: Re: JAWS 4.51 and Internet Explorer...
>
>
>   Hello Keith:
>   By default, JAWS For Windows will read the page from top to bottom.  I =
>   know that this is annoying, but you can set JAWS not to do this.  If you =
>   need help with this, you may Email me privately.  Here are the basic =
>   steps:
>
>   1) Go into the JAWS Script manager with insert+0 and bring up the =
>   default script file.
>   2) Press control+l for the scripts list, and then press the letter d =
>   until you hear DocumentLoadedEvent.  Press enter.
>   3) Locate the line in this script file that reads like this:
>   SayAll()
>
>     This line is located near the very end of the script.
>
>   4) Delete this line.
>
>   5) Press control+s to save this script.
>
>
>
>   Now, JAWS should say something like "Page has 99 links" and then will =
>   quit speaking.
>
>     ----- Original Message -----=20
>     From: keithint38@xxxxxxx=20
>     To: jfw@xxxxxxxxxxxxx=20
>     Sent: Friday, November 28, 2003 6:20 PM
>     Subject: JAWS 4.51 and Internet Explorer...
>
>
>     Dear List. When JAWS 4.51 and Internet Explorer open to a page ware a =
>   control=20
>     is set as active JAWS just says  Page has so many links, and starts =
>   reading=20
>     from the top of the page. Any ideas on what's happening here? Because =
>   I sure=20
>     don't, know wy that's happening. Regards, Keith.
>
>     To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>     To unsubscribe from this mailing list, send a message to =
>   jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>
>   To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>   To unsubscribe from this mailing list, send a message to =
>   jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>   To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>   To unsubscribe from this mailing list, send a message to 
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>
>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>To unsubscribe from this mailing list, send a message to 
>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.



To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.

Other related posts: