Re: JAWS 4.51 and Internet Explorer...

Well, you would go into your JAWS folder, possibly c:\jaws50.  From there, go 
to the Settings folder, then Enu, then locate default.jss and copy it to 
another place.  You may then paste it back into the folder if ever you would 
like to revert back to it.
Grant
  ----- Original Message ----- 
  From: Heeru Chandnani 
  To: jfw@xxxxxxxxxxxxx 
  Sent: Friday, November 28, 2003 8:33 PM
  Subject: RE: JAWS 4.51 and Internet Explorer...


  How do I back the JSS file?

  -----Original Message-----
  From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]On
  Behalf Of Grant Hardy
  Sent: Saturday, November 29, 2003 9:44 AM
  To: jfw@xxxxxxxxxxxxx
  Subject: Re: JAWS 4.51 and Internet Explorer...


  All you would have to do is add the line to the script file again.  If =
  you're unsure about it though, I would recommend backing up your =
  default.jss file to another location.
  Grant
    ----- Original Message -----=20
    From: Heeru Chandnani=20
    To: jfw@xxxxxxxxxxxxx=20
    Sent: Friday, November 28, 2003 7:56 PM
    Subject: RE: JAWS 4.51 and Internet Explorer...


    Is there a way to undo this? What I mean is, is there a way of making =
  =3D
    JAWS start speaking the whole page if it is set to just saying The =
  Page =3D
    has 99 links?

    Heeru


    -----Original Message-----
    From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]On
    Behalf Of Grant Hardy
    Sent: Saturday, November 29, 2003 8:17 AM
    To: jfw@xxxxxxxxxxxxx
    Subject: Re: JAWS 4.51 and Internet Explorer...


    Hello Keith:
    By default, JAWS For Windows will read the page from top to bottom.  I =
  =3D
    know that this is annoying, but you can set JAWS not to do this.  If =
  you =3D
    need help with this, you may Email me privately.  Here are the basic =
  =3D
    steps:

    1) Go into the JAWS Script manager with insert+0 and bring up the =3D
    default script file.
    2) Press control+l for the scripts list, and then press the letter d =
  =3D
    until you hear DocumentLoadedEvent.  Press enter.
    3) Locate the line in this script file that reads like this:
    SayAll()

      This line is located near the very end of the script.

    4) Delete this line.

    5) Press control+s to save this script.



    Now, JAWS should say something like "Page has 99 links" and then will =
  =3D
    quit speaking.

      ----- Original Message -----=3D20
      From: keithint38@xxxxxxx=3D20
      To: jfw@xxxxxxxxxxxxx=3D20
      Sent: Friday, November 28, 2003 6:20 PM
      Subject: JAWS 4.51 and Internet Explorer...


      Dear List. When JAWS 4.51 and Internet Explorer open to a page ware =
  a =3D
    control=3D20
      is set as active JAWS just says  Page has so many links, and starts =
  =3D
    reading=3D20
      from the top of the page. Any ideas on what's happening here? =
  Because =3D
    I sure=3D20
      don't, know wy that's happening. Regards, Keith.

      To post a message to the list, send it to jfw@xxxxxxxxxxxxx
      To unsubscribe from this mailing list, send a message to =3D
    jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject =
  line.

    To post a message to the list, send it to jfw@xxxxxxxxxxxxx
    To unsubscribe from this mailing list, send a message to =3D
    jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject =
  line.
    To post a message to the list, send it to jfw@xxxxxxxxxxxxx
    To unsubscribe from this mailing list, send a message to =
  jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.

  To post a message to the list, send it to jfw@xxxxxxxxxxxxx
  To unsubscribe from this mailing list, send a message to =
  jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
  To post a message to the list, send it to jfw@xxxxxxxxxxxxx
  To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.

To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.

Other related posts: