Re: JAWS 4.51 and Internet Explorer...

All you would have to do is add the line to the script file again.  If you're 
unsure about it though, I would recommend backing up your default.jss file to 
another location.
Grant
  ----- Original Message ----- 
  From: Heeru Chandnani 
  To: jfw@xxxxxxxxxxxxx 
  Sent: Friday, November 28, 2003 7:56 PM
  Subject: RE: JAWS 4.51 and Internet Explorer...


  Is there a way to undo this? What I mean is, is there a way of making =
  JAWS start speaking the whole page if it is set to just saying The Page =
  has 99 links?

  Heeru


  -----Original Message-----
  From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]On
  Behalf Of Grant Hardy
  Sent: Saturday, November 29, 2003 8:17 AM
  To: jfw@xxxxxxxxxxxxx
  Subject: Re: JAWS 4.51 and Internet Explorer...


  Hello Keith:
  By default, JAWS For Windows will read the page from top to bottom.  I =
  know that this is annoying, but you can set JAWS not to do this.  If you =
  need help with this, you may Email me privately.  Here are the basic =
  steps:

  1) Go into the JAWS Script manager with insert+0 and bring up the =
  default script file.
  2) Press control+l for the scripts list, and then press the letter d =
  until you hear DocumentLoadedEvent.  Press enter.
  3) Locate the line in this script file that reads like this:
  SayAll()

    This line is located near the very end of the script.

  4) Delete this line.

  5) Press control+s to save this script.



  Now, JAWS should say something like "Page has 99 links" and then will =
  quit speaking.

    ----- Original Message -----=20
    From: keithint38@xxxxxxx=20
    To: jfw@xxxxxxxxxxxxx=20
    Sent: Friday, November 28, 2003 6:20 PM
    Subject: JAWS 4.51 and Internet Explorer...


    Dear List. When JAWS 4.51 and Internet Explorer open to a page ware a =
  control=20
    is set as active JAWS just says  Page has so many links, and starts =
  reading=20
    from the top of the page. Any ideas on what's happening here? Because =
  I sure=20
    don't, know wy that's happening. Regards, Keith.

    To post a message to the list, send it to jfw@xxxxxxxxxxxxx
    To unsubscribe from this mailing list, send a message to =
  jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.

  To post a message to the list, send it to jfw@xxxxxxxxxxxxx
  To unsubscribe from this mailing list, send a message to =
  jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
  To post a message to the list, send it to jfw@xxxxxxxxxxxxx
  To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.

To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.

Other related posts: