Re: JAWS 4.51 and Internet Explorer...

Hello Keith:
By default, JAWS For Windows will read the page from top to bottom.  I know 
that this is annoying, but you can set JAWS not to do this.  If you need help 
with this, you may Email me privately.  Here are the basic steps:

1) Go into the JAWS Script manager with insert+0 and bring up the default 
script file.
2) Press control+l for the scripts list, and then press the letter d until you 
hear DocumentLoadedEvent.  Press enter.
3) Locate the line in this script file that reads like this:
SayAll()

  This line is located near the very end of the script.

4) Delete this line.

5) Press control+s to save this script.



Now, JAWS should say something like "Page has 99 links" and then will quit 
speaking.

  ----- Original Message ----- 
  From: keithint38@xxxxxxx 
  To: jfw@xxxxxxxxxxxxx 
  Sent: Friday, November 28, 2003 6:20 PM
  Subject: JAWS 4.51 and Internet Explorer...


  Dear List. When JAWS 4.51 and Internet Explorer open to a page ware a control 
  is set as active JAWS just says  Page has so many links, and starts reading 
  from the top of the page. Any ideas on what's happening here? Because I sure 
  don't, know wy that's happening. Regards, Keith.

  To post a message to the list, send it to jfw@xxxxxxxxxxxxx
  To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.

To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.

Other related posts: