Re: How to activate AVG buttons in a threat alert
- From: "Yardbird" <yardbird@xxxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Tue, 27 Nov 2007 07:34:32 -0800
Chris,
Not a bad suggestion, to take a look in the virus vault. But the rest seems
a bit overcomplicated. I mean, I've just performed a full system scan, and
turned up no more threats. Why would I be so anxious that I'd do exactly the
same thing all over again? I have a feeling it's taken care of.
Thanks.
----- Original Message -----
From: "Chris Hallsworth" <christopherhallsworth71@xxxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Tuesday, November 27, 2007 12:22 AM
Subject: Re: How to activate AVG buttons in a threat alert
Hi, why not check the AVG Virus Vault and see if it's gone to there.
Alternatively, do a scan on that particular file only, if it can be found
that is. If no threats were detected on the file itself, then chances are it
healed it successfully. If in doubt, just perform another full scan. Chances
are the alert won't come up and you'll truly have no threats on your
computer. Hope that helps.
Chris Hallsworth
BrailleNote mPower User
Website: www.chrishallsworth.co.nr
----- Original Message -----
From: "Yardbird" <yardbird@xxxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Tuesday, November 27, 2007 1:49 AM
Subject: Re: How to activate AVG buttons in a threat alert
> Well, following Jennifer's suggestion, I launched the AVG Test Center and
> ran a full test, hoping that if I'd failed to give a useful command when I
> got the notice that it had caught a Trojan and left it untreated, this
> would
> take care of it.
>
> Well, I sure hope that AVG really did something to fix it by default when
> I
> failed to issue a command in that advisory dialogue earlier, because after
> running the full scan, it says no threats found, nothing deleted, nothing
> moved to the virus vault. So I sure hope it was handled without my
> participation. Input, as we say. I'll cross my fingers.
>
> ----- Original Message -----
> From: "Yardbird" <yardbird@xxxxxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Monday, November 26, 2007 4:43 PM
> Subject: Re: How to activate AVG buttons in a threat alert
>
>
> That sounds logical, except this dialogue had several options and none of
> them was like the OK at the end of the update service, for instance. They
> were real things you'd want to be able to choose from among. And although
> that dialogue disappears, the AVG interface for Control Center that has
> been
> launched remains on the screen. Also, the dialogue came up again, a few
> minutes later, but I didn't catch it that time, either. But thanks.
> ----- Original Message -----
> From: "James Scholes" <jamesscholes@xxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Monday, November 26, 2007 1:39 PM
> Subject: Re: How to activate AVG buttons in a threat alert
>
>
> Usually when an AVG box times out it activates the button that it thinks
> is
> most appropriate, e.g. the ok button on the update finished screen, so I
> would be inclined to believe that it had got of rid of the threat for you.
> But I would do a system scan just in case, better to be safe than sorry!
>
> James Scholes
>
>
> ==========
>
> Contact Details:
>
> E-mail/MSN:
> jamesscholes@xxxxxxx
> Skype: james.scholes
>
> Check out my blog at
> http://jamesscholes.wordpress.com
>
>
> --------------------------------------------------
> From: "Yardbird" <yardbird@xxxxxxxxxxxxxx>
> Sent: Monday, November 26, 2007 9:29 PM
> To: "JFW List" <jfw@xxxxxxxxxxxxx>
> Subject: How to activate AVG buttons in a threat alert
>
>> For the first time ever, I got a threat advisory from AVG Free Edition. I
>> was in the kitchen and heard Jaws speaking, as if it had focused on
>> something completely unfamiliar to me. I came back to the computer just
>> in
>> time to hear that I was being read a dialogue telling me about a Trojan
>> found in some program or other, DLL you know sort of thing, many
>> numbers,
>> and asking me if I wanted to heal, move to virus vault, and so forth.
>> Except
>> just as I instinctively began pressing my tab key to move among the
>> options, as I imagined I'd be able to do, the thing just disappeared,
>> leaving me in the interface of the AVG control center, which apparently
>> had
>> been launched in order to display this advisory.
>>
>> I don't know what to do. Can I make that dialogue reappear? And then, if
>> it
>> stays visible long enough, how can I decide which control to activate and
>> how to activate it?
>>
>> Thanks. This is worrisome. I don't want to leave some threat sitting in a
>> file possibly able to do damage if I don't respond .
>>
>>
>> --
>> JFW related links:
>> JFW homepage: http://www.freedomscientific.com/
>> Scripting mailing list:
>> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>> JFW List instructions:
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received from the list, or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the
> way the list is being run, do not post them to the list. Rather contact
> the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>
>
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the
> way the list is being run, do not post them to the list. Rather contact
> the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>
>
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
