RE: Creating Message Rules in OE/WM

Hello,

 

Can these instructions for creating message rules be applied to Outlook 2003
as well? I?ve tried creating rules, but can?t seem to figure it out either.

 

Cristobal

 

 

 

  _____  

From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Steve Britt
Sent: Saturday, February 09, 2008 8:03 AM
To: jfw@xxxxxxxxxxxxx
Subject: Re: Creating Message Rules in OE/WM

 

Jake, the underlined value part of the rules is accessible; there's a
navigation trick I'll show you that might make things easier.

In the message rules screen, after you click on the initial add button:

when you get to the third tab where it tells you to click on an underlined
area, hit down arrow once and it'll tell you the actual field where you type
in the value you want it to look for. At this point, hit enter, tab down to
okay, and hit enter again. You're back at the third tab once again. If
you're making a delete rule, then, at this point, you can tab through and
finish the rule.

If you're making a rule that'll move the applied messages to a particular
folder (assuming that particular foler exists), then there's an additional
step you'll need to take: hit down arrow twice, and it'll ask you which
folder you want the applied messages to go to. Hit enter at this point, and
you'll be presented with a list of folders. Hit down arrow until you hear
the folder you want, then tab to the okay button, and hit enter. At this
point, you can tab through and finish the rest of the rule.

Hope this helps.

 

----- Original Message ----- 

From: Jake Joehl <mailto:jajoehl@xxxxxxx>  

To: jfw@xxxxxxxxxxxxx 

Sent: Friday, February 08, 2008 10:51 AM

Subject: Creating Message Rules in OE/WM

 

Hi all. I have been getting a message from Yahoo! every single day since I
started using my new email account, and I want it permanently deleted from
the server each time. How do I do this? I tried going to Message Rules and
then following the instructions from there, but it says to click on an
underlined value and that part appears not to be accessible. Thanks.

Jake

Please visit me at http://jajoehl_74.tabulas.com

Other related posts: