RE: Braille display not working
- From: "Milton Ota" <mota@xxxxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Tue, 2 Nov 2010 13:33:07 -1000
Have you tried a different USB cable?
_____
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Gezim Rexha
Sent: Tuesday, November 02, 2010 12:52 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: Braille display not working
Hi all,
I still haven't managed to make my Braille display work, and your help would
be greatly appreciated. Furthermore, this Friday I am supposed to train a
group of mainstream teachers on visual impairment, and I would try to show
my laptop working with the Braille display. All what the display does as
soon as I plug it is that the name "Focus 40 3.70" appears, but it does not
react to anything else at all.
Best regards,
Gezim
From: Kerri <mailto:shalom75@xxxxxxx>
Sent: Saturday, October 23, 2010 10:33 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: Braille display not working
Hi, have you tried a different uSb port? Do you have Magic jack? I cannot
install any other USB device while using magic jack.
----- Original Message -----
From: Gezim <mailto:gezim_rexha@xxxxxxxxxxx> Rexha
To: jfw@xxxxxxxxxxxxx
Sent: Saturday, October 23, 2010 2:15 PM
Subject: Braille display not working
Hi all,
I recently got a Focus 40 3.70 Braille display. At the beginning it worked
fine, but today when I connected it through the USB, it did not function.
Basically, only the name of the display appears in Braille and that's all. I
tried to install it under the JAWS speech and Braille synthesizers, but with
no success.
Any ideas?
Cheers,
Gezim
Other related posts:
