Re: Braille display not working

I tried a new USB port, and it told me that it was installed successfully; 
however, the same issue again. It displays "Focus 40 3.70, but nothing else. Is 
there anything I can do on the display itself in order to activate it?

Best wishes,
Gezim


From: Farfar Carlson 
Sent: Saturday, October 23, 2010 11:21 PM
To: jfw@xxxxxxxxxxxxx 
Subject: Re: Braille display not working


Might be a USB issue. Recommend you disconnect, reboot, and then connect again.

Dave Carlson
Created in the Audio Recording and Mixing Studios, San Jose, California

  ----- Original Message ----- 
  From: Gezim Rexha 
  To: jfw@xxxxxxxxxxxxx 
  Sent: Saturday, October 23, 2010 14:15
  Subject: Braille display not working


  Hi all,

  I recently got a Focus 40 3.70 Braille display. At the beginning it worked 
fine, but today when I connected it through the USB, it did not function. 
Basically, only the name of the display appears in Braille and that's all. I 
tried to install it under the JAWS speech and Braille synthesizers, but with no 
success.

  Any ideas?

  Cheers,
  Gezim

Other related posts: