Re: Adjusting th volume of the real speak voices

well Ted. At first I thought Samantha was a lesbian. I didn't like her. I thought she was too loud and rough. Turns out she likes men and we are getting along just fine. hahahahahahah. She is the clearest voice I think. 


my web site
www.11954.com/gomes
phone 720-747-4990
----- Original Message ----- From: "Lisle, Ted (CHFS DMS)" <Ted.Lisle@xxxxxx> 
To: <jfw@xxxxxxxxxxxxx>
Sent: Friday, January 12, 2007 6:04 AM
Subject: RE: Adjusting th volume of the real speak voices



Yep, she's not shy, is she?

I've never tried running two cards, especially as today's multichannel
cards can give me JAWS and a DVD, CD, or whatever, at the same time, if
necessary.  I think I'd defer to FS on that one.  If they don't have a
bulletin on the subject, it's probably something they need to address.

Ted

-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
Behalf Of Bobcat
Sent: Thursday, January 11, 2007 7:14 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: Adjusting th volume of the real speak voices


Hi Ted.  I didn't know it was possible to change the volume of the
RealSpeak
voices till I read your tips.  I needed to turn down Samantha cause she
was
such a loud mouth. <grin>

But, now I have a new problem.  Now the RealSpeak voices are coming
through
my second audio card instead of my default card.  Eloquence is still
coming
from the default card.  I hope there is a way to get Jaws to send The
SAPI 5
voices through the default card again.
----- Original Message ----- From: "Lisle, Ted (CHFS DMS)" <Ted.Lisle@xxxxxx> 
To: <jfw@xxxxxxxxxxxxx>
Sent: Thursday, January 11, 2007 7:52 AM
Subject: RE: Adjusting th volume of the real speak voices


What I do is hot switch to the RealSpeak voice (JAWS-Ctrl-S, then use
the JAWS voice menu to set the volume.  Try to get it as close as you
can to eloquence, to avoid a jarring transition.

Ted

Ted

-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx]
On Behalf Of stacey robinson
Sent: Thursday, January 11, 2007 9:06 AM
To: Jaws list
Subject: Adjusting th volume of the real speak voices



   Hi,
I'm using the  real speak voices in say all.  How do  I adjust
the volume of these voices so that they're not real loud when using
headphones  ?

Thanks,

Stacey and GEB dog Chesley

staceyr75@xxxxxxxxxxxxx


--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com 
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. 
Archives located at: http://www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx 



--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list: 
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx

Other related posts: