RE: Access to MicroSoft Reader

Hi Dave.
Yes you can. If you have jaws 6 or higher. Go into the jaws window, and go
into the language menu. Then go to change synthesizer sub menu. Then select
the one you want to use. If it's not there, then go to the sappy 4 detect.
After jaws finds the program, go back into that menu, and find it and choose
it. After jaws has the program in it's list of synthasizers, you can also
use controle insert s to bring up the synthesizer list and choose which one
you want to use from there.

Mathew

-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of David Allen
Sent: Monday, October 31, 2005 3:49 PM
To: jfw@xxxxxxxxxxxxx
Subject: Access to MicroSoft Reader

Hello!

Can MicroSoft Reader be used with Jaws? If so, what version(s) of it and 
with what version of Jaws is access available?

Cheers,
Dave

David Allen
Independent Adaptive Technology Consulting at reasonable rates

115-A Musselburgh Rise
Dunedin 9001
New Zealand
Telephone: +64-(03)455-7694
Mobile: +64-(021)079-6006
Email: wd8ldy@xxxxxxxxxx 

--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx

--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: http://www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx

Other related posts: