Thanks. That's a good thing to check. But in this case it's not the culprit. The documentation for the functions directly above and below the function that doesn't work shows up fine with control+d. Also I can use control+l to move to the function. -----Original Message----- From: jawsscripts-bounce@xxxxxxxxxxxxx [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Andrew Hart Sent: Wednesday, March 07, 2012 01:05 To: jawsscripts@xxxxxxxxxxxxx Subject: [jawsscripts] Re: Viewing script documentation in script manager Hi. I've been coding in JAWS script over the last few weeks using both JAWS 12.0 and 13.0 and the only time this ever happened to me was when I did something silly like forgetting to close a comment, that is, I placed /* before a script to comment it out and erroneously typed /* again after the script instead of */ to close the comment. That played havic with things until I realised what I'd done. Apart from that, I haven't experienced the issues you describe. I am using JAWS 12.0.1170 and JAWS 13.0.718. Hth, Andrew. On 7/03/2012 2:54 PM, Mike O'Brien wrote: > Hi > > When I open one of my script files in the JAWS Script Manager, when I > have the PC cursor within some of the scripts or functions, control+d > does not bring up the window with the script documentation. Also I > cannot use > control+I to insert a function. These keys do nothing within those scripts. > Also when I go to the menus, both of those choices say not available. > There is documentation in the JSD file for the ones I checked. This > is happening in JAWS 13, but also occurred in earlier releases. > > Thanks for any help. > > > Mike > > __________� > > View the list's information and change your settings at > //www.freelists.org/list/jawsscripts > > > __________� View the list's information and change your settings at //www.freelists.org/list/jawsscripts __________� View the list's information and change your settings at //www.freelists.org/list/jawsscripts