[jawsscripts] Re: Bottom Edge Question

 

________________________________

From: jawsscripts-bounce@xxxxxxxxxxxxx
[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Smith, Alice A.
HQ DCO
Sent: Tuesday, January 22, 2008 3:15 PM
To: jawsscripts@xxxxxxxxxxxxx
Subject: [jawsscripts] Re: Bottom Edge Question


Mike,
 
Hmmm. Are you using JAWS 9? This is a change in JAWS 9 and is not in
earlier versions of JAWS. 
I can find it in JAWS 9 by opening the script manager using Ins + zero,
opening shared file "default.jcf" then doing a Ctrl+F and searching on
"topandbottom".
 
Alice
 


________________________________

        From: jawsscripts-bounce@xxxxxxxxxxxxx
[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Trent, Mike
        Sent: Friday, January 18, 2008 9:10 AM
        To: jawsscripts@xxxxxxxxxxxxx
        Subject: [jawsscripts] Re: Bottom Edge Question
        
        
        Can't find that in Default.jcf. 
        I did find a Top_And_Bottom_Edge_alert=126 in the hjconst.jsh.

________________________________

        From: jawsscripts-bounce@xxxxxxxxxxxxx
[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Smith, Alice A.
HQ DCO
        Sent: Thursday, January 17, 2008 3:46 PM
        To: jawsscripts@xxxxxxxxxxxxx
        Subject: [jawsscripts] Re: Bottom Edge Question
        
        
        If you are using BottomEdgeEvent in JAWS 9, beware, it is turned
off by default. To turn it on add the following lines to your script jcf
file or change the value in the default.jcf.
         
        ; determines whether the TopEdgeEvent and BottomEdgeEvent will
fire, 1=true, 0=false

        TopAndBottomEdgeAlert=1


________________________________

                From: jawsscripts-bounce@xxxxxxxxxxxxx
[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Trent, Mike
                Sent: Wednesday, January 16, 2008 4:03 PM
                To: jawsscripts@xxxxxxxxxxxxx
                Subject: [jawsscripts] Bottom Edge Question
                
                

                I have a very simple script to read the word directly
under the PC cursor and then move to that word. This is for Rumba. I m
using it to read columns of text on the mainframe. It works fine except
when I get to the bottom of the page, then it just says blank. What I'd
like to do is know how to recognize the bottom edge and do or say
something other than 'blank'. 

                The script is as I said very simple. 

                Script SayWordOnNextLine () 
                SaveCursor () 
                InvisibleCursor () 
                RouteInvisibleToPc () 
                NextLine () 
                SayWord () 
                RoutePcToInvisible () 
                EndScript 

                I found a BottomEdgeEvent function and a
ProcessBoundaryStrike function but I can't tell a lot about how they are
used. The only reference material I have is what comes with Jaws. 

                I have reclassed the window to a multi Line edit window.
I don't know if that is the correct thing to do or not.

Other related posts: