[JAWSLite] Re: jaws leaving off sylables

The following suggestions assume that you are using Microsoft Word.

Check to see if you are working in print layout view.  Use alt-V for view menu 
and then use the down arrow key to see if print layout is checked.  if JAWS 
does not say Checked then press enter.  

In addition to maximizing Word you might try maximizing the document with 
Alt-Dash followed by X.  

The task pane or another active toolbar might be obscuring the part of the 
window that you are not having read to you.  Go under view and see if the task 
pane is active.  If it is checked then try pressing enter on the menu choice to 
uncheck it and see if that makes a difference or not.  I don't use Word 2000 
any more but when I did the task pane did interfere somewhat.  Also check for 
other toolbars that might be obscuring part of the screen.  Again press Alt-V 
for view and find the toolbars submenu with the down arrow key.  Right arrow 
into the submenu and arrow down to see which toolbars are checked.  If there is 
one checked that you don't need at the time then press enter on it to uncheck 
it.  Then go back into the view menu and uncheck other toolbars that you are 
not using at the time.  You want to leave the standard and formatting toolbars 
active, and of course others that you need for the work you are doing in your 
current session.

Brian Lee
brianllee@xxxxxxxxxxx



----- Original Message ----- 



  From: Judith Bron 
  To: jawslite@xxxxxxxxxxxxx 
  Sent: Sunday, December 30, 2007 9:07 AM
  Subject: [JAWSLite] jaws leaving off sylables


  When doing a line read back Jaws is leaving off part of the last sylable of 
words.  I've refreshed and maximized the screen.  Any suggestions?  Thanks, 
Judith

Other related posts: