[jaws-uk] Re: realspeak

Rebecca,
 
    Depending on whether you want the RealSpeak voice to be used whenever
you use the Say All command, or whether you only want it to happen in one
application, try the following steps.
 
*To make the change universal.
 
1. Go to the Jaws menu and select Utilities.
2. Select the Configuration Manager from the menu that appears.
3. Go to the Set Options menu and select Say All Options.
4. In the settings window that opens, put a check in the first checkbox, Use
Sapi 5 during say all.
5. Use the tab key to move the next few settings, which will enable you to
change the speed, punctuation of the Sapi 5 voice.
6. Press OK to confirm your changes.
7. Go to the File menu and select Save to confirm the changes.
8. Exit the Configuration Manager.
 
*To make the change in a specific application.
 
1. Open the givenn application.
2. Press the Jaws key and 6, to open the Configuration Manager with the
right configuration file already present.
3. Go to the Set Options menu and select Say All Options.
4. In the settings window that opens, put a check in the first checkbox, Use
Sapi 5 during say all.
5. Use the tab key to move the next few settings, which will enable you to
change the speed, punctuation of the Sapi 5 voice.
6. Press OK to confirm your changes.
7. Go to the File menu and select Save to confirm the changes.
8. Exit the Configuration Manager.
 
 
Regards,
Léonie.                
 
 
                 

  _____  

From: jaws-uk-bounce@xxxxxxxxxxxxx [mailto:jaws-uk-bounce@xxxxxxxxxxxxx] On
Behalf Of Rebecca
Sent: 17 July 2007 16:25
To: jaws-uk@xxxxxxxxxxxxx
Subject: [jaws-uk] realspeak


Hi all!
 
Sorry to be a bother with something that's probably supposed to be obvious
but I'm a new Jaws user. 
 
I have recently installed Jaws 8.0 and at the same time installed the
Realspeak Solo CD that came with it. However, I have no idea how to switch
to one of these other voices.
 
Could anyone help?

Other related posts: